Other Name: Belt, Generator; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2011 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
Chevrolet Aveo Drive Belt
Our website offers an extensive catalog of genuine Chevrolet Aveo Drive Belt at unbeatable prices. Every OEM Chevrolet Aveo Drive Belt comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Aveo Drive Belt Parts Questions & Experts Answers
Q: How to replace the power steering drive belt on Chevrolet Aveo?
A: The replacement of power steering pump belt starts by taking off the engine accessory Drive Belt. Construct a plan that starts with removing the rh headlamp assembly along with the air cleaner assembly. Introduce a long rod into the available space between engine and pump Drive Belt to help perform the removal work. Guide the Drive Belt through the opposite direction of the engine with its exterior surface directed toward the machine. The installation requires a 3/8 inch hex bit socket placed into the power steering pump pulley shaft hole to rotate the pulley clockwise and push the Drive Belt until it is completely loose. Begin power steering pump Drive Belt installation by placing it on the Water Pump Pulley while setting the first of three pulley holes at the uppermost position. You need a cable tie to guide your Drive Belt installation by fastening it through the pulley hole to the pump pulley. The power steering pump pulley shaft hole should accept a 3/8 inch hex bit socket to rotate the pulley clockwise until the belt is appropriately seated. Check belt installation correctness by removing the tie then reinstall both assemblies before putting back the rh headlamp and air cleaner. You must install the engine accessory belt as your last step.