How to replace the power steering pump drive belt on 2004 Chevrolet Aveo?

The first step for installing the Power Steering Pump Drive Belt requires use of the Belt Tension Gage (J 23600-B) to measure the belt tension. Adjust the belt tension until the correct range through alteration of the alternator adjusting bolt followed by alternator movement until the gage reading shows proper tension. Proceed to tighten the alternator adjusting bolt to a torque level of 20 Nm following the attainment of proper tension.

OEM 2004 Chevrolet Aveo Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2004 Chevrolet Aveo Serpentine Belt
Part Number: 96183108
$34.29 MSRP: $64.40
You Save: $30.11 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Fan, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit.; Belt, Drive
- Replaced by: 25183021
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.3 x 3.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96183108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2004 Chevrolet Aveo Drive Belt

With a comprehensive array of OEM 2004 Chevrolet Aveo Drive Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Aveo Drive Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the power steering pump drive belt on 2004 Chevrolet Aveo?
A: The first step for installing the Power Steering Pump Drive Belt requires use of the Belt Tension Gage (J 23600-B) to measure the belt tension. Adjust the belt tension until the correct range through alteration of the alternator adjusting bolt followed by alternator movement until the gage reading shows proper tension. Proceed to tighten the alternator adjusting bolt to a torque level of 20 Nm following the attainment of proper tension.