How to replace the power steering pump drive belt on 2007 Chevrolet Aveo?

Start the Power Steering Pump Drive Belt replacement by checking the belt tension using the belt tension gage (J 23600-B). Adhere to the proper tension mark on the gage by rotating the bolt to loosen the Alternator and shifting it until the gage points to the correct tension. Then, tighten the bolt to 20 n.m (15 lb ft). Once correct tension emerges from the belt tension gage (J 23600-B) you should make the Alternator adjusting bolt tight to 20 n.m (15 lb ft).

OEM 2007 Chevrolet Aveo Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2007 Chevrolet Aveo Serpentine Belt
Part Number: 96183108
$34.29 MSRP: $64.40
You Save: $30.11 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Fan, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit.; Belt, Drive
- Replaced by: 25183021
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.3 x 3.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96183108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2007 Chevrolet Aveo Drive Belt

With a comprehensive array of OEM 2007 Chevrolet Aveo Drive Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Aveo Drive Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the power steering pump drive belt on 2007 Chevrolet Aveo?
A: Start the Power Steering Pump Drive Belt replacement by checking the belt tension using the belt tension gage (J 23600-B). Adhere to the proper tension mark on the gage by rotating the bolt to loosen the Alternator and shifting it until the gage points to the correct tension. Then, tighten the bolt to 20 n.m (15 lb ft). Once correct tension emerges from the belt tension gage (J 23600-B) you should make the Alternator adjusting bolt tight to 20 n.m (15 lb ft).