How to replace the drive belt on Chevrolet Silverado 1500 Classic?

You need to begin by attaching a 3/8 inch drive breaker bar to the drive belt tensioner arm and turn it counterclockwise to decrease belt tension. Vehicle owners should remove the belt from both pulleys and the drive belt tensioner when not using air conditioning systems. Remove the breaker bar as you slow down the process of tension release on the drive belt tensioner. Check the belt surfaces of all pulleys after cleaning them. You should first direct the belt to run past all pulleys except the flat idler. After that, position the 3/8 inch drive breaker bar onto the drive belt tensioner arm before rotating the tensioner counterclockwise to free belt tension. The belt installation process requires that you put the belt under the flat idler pulley when your car has A/C but you should position the belt in front of the pulleys and drive belt tensioner if it does not have A/C. After controlling the tension on the belt tensioner remove the breaker bar. Then check that the drive belt shows proper installation while maintaining alignment between the pulleys.

OEM Chevrolet Silverado 1500 Classic Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Belts found

View related parts
Chevrolet Silverado 1500 Classic Serpentine Belt
Part Number: 12576454
$35.95 MSRP: $61.46
You Save: $25.51 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Fan Belt; Belt, Drive
- Replaces: 12569351, 12564760, 10243936
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | LS, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Classic Serpentine Belt
Part Number: 12637204
$43.97 MSRP: $95.20
You Save: $51.23 (54%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12557501, 12569348, 12576451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Classic Serpentine Belt
Part Number: 12637202
$45.00 MSRP: $98.26
You Save: $53.26 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12576450, 12554029, 10105314, 12550608, 12569347, 24505041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Classic Serpentine Belt
Part Number: 12637200
$57.36 MSRP: $102.42
You Save: $45.06 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12576448
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Silverado 1500 Classic Serpentine Belt
Part Number: 12576455
$48.82 MSRP: $87.19
You Save: $38.37 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | LS, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Classic Serpentine Belt
Part Number: 12576447
$21.85 MSRP: $41.04
You Save: $19.19 (47%)
ADD TO CART
Product Specifications
- Other Name: Belt, A/C Compressor; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12569346, 12554028
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Silverado 1500 Classic Drive Belt

Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Classic Drive Belt at unbeatable prices. Every OEM Chevrolet Silverado 1500 Classic Drive Belt comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 1500 Classic Drive Belt Parts Questions & Experts Answers

Serpentine Belt
12637200
Q: How to replace the drive belt on Chevrolet Silverado 1500 Classic?
A: You need to begin by attaching a 3/8 inch drive breaker bar to the drive belt tensioner arm and turn it counterclockwise to decrease belt tension. Vehicle owners should remove the belt from both pulleys and the drive belt tensioner when not using air conditioning systems. Remove the breaker bar as you slow down the process of tension release on the drive belt tensioner. Check the belt surfaces of all pulleys after cleaning them. You should first direct the belt to run past all pulleys except the flat idler. After that, position the 3/8 inch drive breaker bar onto the drive belt tensioner arm before rotating the tensioner counterclockwise to free belt tension. The belt installation process requires that you put the belt under the flat idler pulley when your car has A/C but you should position the belt in front of the pulleys and drive belt tensioner if it does not have A/C. After controlling the tension on the belt tensioner remove the breaker bar. Then check that the drive belt shows proper installation while maintaining alignment between the pulleys.