How to replace the Drive Belt for the A/C on Chevrolet Suburban 1500?

Your first step should be lifting the vehicle securely and eliminating the accessory Drive Belt before the replacement operation. You should remove both the engine shield bolts and afterward the engine shield. A ratchet inserted into the a/c belt tensioner adapter opening should rotate the tensioner clockwise until the belt has no tension before removing the belt from the pulleys. Proceed to remove the ratchet tool before cleaning all pulley belts surfaces when the tension on the a/c belt tensioner reaches the proper state. To install the a/c belt start by placing it on the crankshaft balancer before using a ratchet with the corresponding opening on the a/c Drive Belt tensioner adapter to rotate the tensioner clockwise. First position the a/c belt over the idler pulley and around the a/c compressor pulley and afterwards let out the tension on the a/c belt tensioner slowly before removing the ratchet. Verify the a/c belt installation and alignment before putting back the engine shield and tightening its bolts to 20 nm (15 ft. Lbs.). Lower your vehicle afterwards before reinstalling the accessory Drive Belt.

OEM Chevrolet Suburban 1500 Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Belts found

View related parts
Chevrolet Suburban 1500 Serpentine Belt
Part Number: 19210691
$38.16 MSRP: $81.30
You Save: $43.14 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Kit, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Serpentine Fit Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12603509, 19178068
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Serpentine Belt
Part Number: 12637204
$43.97 MSRP: $95.20
You Save: $51.23 (54%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12557501, 12569348, 12576451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Serpentine Belt
Part Number: 12637202
$45.00 MSRP: $98.26
You Save: $53.26 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12576450, 12554029, 10105314, 12550608, 12569347, 24505041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Serpentine Belt
Part Number: 12626222
$36.80 MSRP: $69.10
You Save: $32.30 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12590622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Serpentine Belt
Part Number: 12576447
$21.85 MSRP: $41.04
You Save: $19.19 (47%)
ADD TO CART
Product Specifications
- Other Name: Belt, A/C Compressor; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12569346, 12554028
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2008 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 1500 Serpentine Belt
Part Number: 12576761
Product Specifications
- Other Name: Belt, Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12569433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Suburban 1500 Drive Belt

Our website offers an extensive catalog of genuine Chevrolet Suburban 1500 Drive Belt at unbeatable prices. Every OEM Chevrolet Suburban 1500 Drive Belt comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 1500 Drive Belt Parts Questions & Experts Answers

Serpentine Belt
12637202
Q: How to replace the Drive Belt for the A/C on Chevrolet Suburban 1500?
A: Your first step should be lifting the vehicle securely and eliminating the accessory Drive Belt before the replacement operation. You should remove both the engine shield bolts and afterward the engine shield. A ratchet inserted into the a/c belt tensioner adapter opening should rotate the tensioner clockwise until the belt has no tension before removing the belt from the pulleys. Proceed to remove the ratchet tool before cleaning all pulley belts surfaces when the tension on the a/c belt tensioner reaches the proper state. To install the a/c belt start by placing it on the crankshaft balancer before using a ratchet with the corresponding opening on the a/c Drive Belt tensioner adapter to rotate the tensioner clockwise. First position the a/c belt over the idler pulley and around the a/c compressor pulley and afterwards let out the tension on the a/c belt tensioner slowly before removing the ratchet. Verify the a/c belt installation and alignment before putting back the engine shield and tightening its bolts to 20 nm (15 ft. Lbs.). Lower your vehicle afterwards before reinstalling the accessory Drive Belt.