Make sure this part fits

GM 19209598
Buckle End, Driver Side

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 19209598 Buckle End, Driver Side
  • Part Description
    Belt Kit, Seat Belt
  • Position
    Driver Side
  • Replaces
    89022592
  • Manufacturer
    General Motors
Make sure this part fits
$23.53 MSRP: $35.02
You Save: $11.49 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19209598 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19209598 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What do you do after removing these components for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Take out the rear seat belt assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after connecting the electrical connector for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Install the front seat belt upper guide with the bolt, ensuring the seat belt webbing is not twisted, and tighten the upper guide bolt to 52.5 Nm (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the seat belt assembly for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel and the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new rear center seat belt assembly for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Position the rear center seat belt assembly on the floor panel and install the bolt, tightening it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new front seat belt assembly for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Position the rear seat belt retractor/pretensioner assembly to the vehicle, ensuring to follow fastener cautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the front seat belt in a Crew Cab for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    First disable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after removing the center seat belt assembly for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Position the new center seat belt assembly over the rear inboard seat adjuster mounting hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the rear center seat belt assembly for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel and the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be reinstalled after routing the seat belt webbing for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the body rear trim panel followed by the rear seat shoulder belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2008 GMC Canyon? Posted by Customer
    A:
    Install the front seat mounting bolt and tighten it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2010 GMC Canyon? Posted by Customer
    A:
    Replace the front seat belt upper guide shoulder bolt trim cover, install the body rear corner trim panel, and then install the front seat belt anchor bolt, ensuring the seat belt webbing is not twisted, and tighten it to 52.5 Nm (39 lb ft) before enabling the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new rear center seat belt assembly for the 2009 GMC Canyon? Posted by Customer
    A:
    Position the rear center seat belt assembly on the floor panel, ensuring to follow fastener caution guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be disconnected next for the 2005 GMC Canyon? Posted by Customer
    A:
    Disconnect the electrical connector from the retractor/pretensioner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What must be done to seat belt systems involved in a collision that deployed automatic restraint devices for the 2004 GMC Canyon? Posted by Customer
    A:
    They must be replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the center front seat belt for the 2007 GMC Canyon? Posted by Customer
    A:
    Remove the rear inboard seat bolt from the passenger seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How do you install the new center seat belt assembly for the 2009 GMC Canyon? Posted by Customer
    A:
    Position the center seat belt assembly over the rear inboard seat adjuster mounting hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    How should the retractor/pretensioner assembly be secured for the 2006 GMC Canyon? Posted by Customer
    A:
    Install the bolt to secure the seat belt retractor/pretensioner assembly to the body, tightening it to 52.5 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Buckle End, Driver Side 19209598 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19209598 Buckle End, Driver Side is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19209598 Buckle End, Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 19209598 maintains top performance when functioning as the Belt Kit, Seat Belt unit at its Driver Side. The component 19209598 is constructed from durable material and its dimensions span 11.0 x 5.4 x 4.6 inches while weighing 1.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Belt Kit, Am6 - Front Split Bench; Belt Kit, Rear Jump Seat; Belt Kit, Deluxe. The part 19209598 has available replacement options 89022592. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.