Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 90542359
Coil Spring

1999-2001 Cadillac Catera

Customer Questions & Expert Answers (4)
GM 90542359 Coil Spring
GM 90542359 Coil Spring
GM 90542359 Coil Spring
  • Part Description
    Spring Kit, Rear Spring; Coil Springs
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 90542359 Coil Spring is Ref No. 8 in the diagram below

    2001 Cadillac Catera Coil Spring Diagram for 90542359
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 90542359

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2001 Cadillac CateraBase, Sport6 Cyl 3.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 90542359 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 90542359 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the coil springs on Cadillac Catera? Posted by Customer
    A:
    The coil spring replacement process starts by properly supporting the vehicle through appropriate elevation and additional stabilizing support at the vehicle's opposite end. Detach lower Control Arm retainers before removing brake pipes as part of retaining brake system enclosure. First detach the link bolts from the stabilizer shaft then extract the link from the lower control arms. The exhaust system rubber components must be removed to allow the exhaust to drop before using support to prevent damage. Support each lower Control Arm while disconnecting rear Wheel Speed Sensor electrical connections and removing shock absorber lower mount bolts to control spring pressure. Start by disconnecting both shock absorber lower mount bolts together with the support bracket on the lower control arms. A transmission jack must support the rear Differential as vehicle body bolts securing the rear axle cradle are removed to extract the rear springs which remain attached to spring seats. Separate the spring seats from each spring. When installing spring seats place them on the springs while maintaining proper spring leg alignment to minimize noise generation. Position the rear springs onto the lower Control Arm before securing them to the body structure. Afterward, raise and position the rear Differential to line up its protective shields. Secure the rear Differential with cradle mount bolts while tightening vehicle body bolts to 65 nm (48 ft. Lbs.). Place the support beneath the left-side lower Control Arm before lifting it into position to bolt in and tighten the shock absorber mount at 110 nm (81 ft. Lbs.). Keep this process running for the installation of the right side lower Control Arm. After installing the stabilizer shaft link to the lower control arms reconnect the rear Wheel Speed Sensor electrical connections and support the exhaust system with rubber insulators. Secure all link bolts with 20 nm (15 ft. Lbs.) torque. After securing the brake pipes to lower control arms with retainers the vehicle is lowered for finaltoe specifications adjustments.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step regarding the rear wheel speed sensor for the 2000 Cadillac Catera? Posted by Customer
    A:
    Reconnect the rear wheel speed sensor electrical connections.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after tightening the upper bearing support nut for the 2001 Cadillac Catera? Posted by Customer
    A:
    Release the spring tension from the spring compressor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coil Spring 90542359 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 90542359 Coil Spring is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 90542359 Coil Spring fits certain Cadillac Catera models.
The original GM component designated by manufacturer part number 90542359 maintains top performance when functioning as the Spring Kit, Rear Spring; Coil Springs unit at its Rear. The component 90542359 is constructed from durable material and its dimensions span 12.2 x 12.2 x 7.4 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring. The part 90542359 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.