Make sure this part fits

GM 19179863
Strut Assembly

1998-2005 GM

Customer Questions & Expert Answers (8)
GM 19179863 Strut Assembly
  • Part Description
    Strut, Front And Rear Suspension; Shock Absorber
  • Position
    Rear
  • Replaces
    89047818, 22064771
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1998-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    1998-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmSE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19179863 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19179863 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after compressing the coil spring again for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Install the strut rod piston nut and tighten it to 47 N-m (34 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step after completing the installation for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the strut be aligned during installation for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Ensure to align the scribe marks for proper alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after drilling the hole in the strut for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Remove the strut from the vise and hold it vertically over a drain pan with the hole facing down.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What precautions should be taken regarding the drive axle joints for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Exercise caution to prevent over-extension of the drive axle joints, as disconnecting either end of the shaft could lead to internal component separation and joint failure; use drive axle joint boot protectors during service near the drive axles to avoid damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What parts need to be detached from the strut assembly for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Detach the strut mount, dust seal, spring seat, upper insulator, coil spring, spring bumper, and lower insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be checked after completing the installation for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut Assembly 19179863 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19179863 Strut Assembly is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19179863 Strut Assembly fits certain Chevrolet Malibu, Classic models, as well as Pontiac Grand Am. Additionally, it is compatible with Oldsmobile Cutlass, Alero models.
The original GM component designated by manufacturer part number 19179863 maintains top performance when functioning as the Strut, Front And Rear Suspension; Shock Absorber unit at its Rear. The component 19179863 is constructed from durable material and its dimensions span 25.7 x 8.2 x 8.1 inches while weighing 9.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Strut. The part 19179863 has available replacement options 89047818, 22064771. Each vehicle needs 2 units of the part marked as SKU 19179863. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.