Make sure this part fits

GM 10369654
Front Seal

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 10369654 Front Seal
  • Part Description
    Seal, Hood Panel
  • Position
    Front
  • Replaces
    15206215
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10369654 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10369654 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the new rear door auxiliary weatherstrip for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Press it into place on the rear door pinchweld flange until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the front door trim panel for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Next, take out the front door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Close the rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Finally, raise the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the upper molded detail to the front of the rear side access door for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Use the one integral retaining pin to install it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after completing the installation for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Close the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new weatherstrip for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Close the front and side doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the weatherstrip to the door frame for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Use the locator tab on the weatherstrip with the notch in the door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front side door weatherstrip for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Begin by opening the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the rear door outer auxiliary weatherstrip for the 2007 GMC Canyon? Posted by Customer
    A:
    Pull it from the rear door pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old weatherstrip for the 2008 GMC Canyon? Posted by Customer
    A:
    Position the new weatherstrip onto the front door and install it around the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you ensure the weatherstrip lip overlaps the interior trim panels and headliner for the 2009 GMC Canyon? Posted by Customer
    A:
    Pull the cord on the front door opening weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the lower molded detail for the 2009 GMC Canyon? Posted by Customer
    A:
    Install it using the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after securing the weatherstrip for the 2010 GMC Canyon? Posted by Customer
    A:
    Close both the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new auxiliary weatherstrip for the 2004 GMC Canyon? Posted by Customer
    A:
    Close the front and rear doors as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2006 GMC Canyon? Posted by Customer
    A:
    Finally, raise the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window glass weatherstrip for the 2005 GMC Canyon? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Seal 10369654 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10369654 Front Seal is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10369654 Front Seal fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 10369654 maintains top performance when functioning as the Seal, Hood Panel unit at its Front. The component 10369654 is constructed from durable material and its dimensions span 53.0 x 4.0 x 1.2 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10369654 has available replacement options 15206215. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.