Make sure this part fits

GM 10409134
Seal

2000-2005 GM

Customer Questions & Expert Answers (14)
GM 10409134 Seal
  • Part Description
    Seal, Hood Panel
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10409134 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10409134 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the old weatherstrip for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Pull the weatherstrip off the pinch weld flange to remove it from the rear door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What panels need to be reinstalled after the weatherstrip installation for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the rear quarter upper trim panel, the rear quarter lower trim panel, the upper center pillar trim panel, and the center lower trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Install the joint butt ends together, reattach the trim panels, and close the rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new door bottom auxiliary weatherstrip for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Position the new door bottom auxiliary weatherstrip onto the rear door, stretching it to align the push-in retainers with the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old rear door opening weatherstrip for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Pull off the rear door opening weatherstrip from the pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the joint butt ends together for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reinstall the carpet retainers, windshield garnish molding, rear upper quarter trim panel, and rear lower quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the trim panels for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Pull off the door opening weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window belt outer sealing strip for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    First, remove the outside rearview mirror and the screws from the front door outer belt sealing strip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you ensure about the joint butt ends during installation for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Ensure that there is no gap and that they are located in the center of the rocker panel area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new front door opening weatherstrip for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Position the new weatherstrip onto the pinch-weld flange, starting at the center of the rocker panel area and pressing it in a clockwise direction until fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip metal joint be aligned for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Align the weatherstrip metal joint to the center of the striker on the rear compartment lid, avoiding stretching the weatherstrip around the corners to minimize bulging.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step in the installation process for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Position the front door window channel into the front door, securing it from the top corner outward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after aligning the joint butt ends for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reinstall the carpet retainers, windshield garnish molding, rear upper quarter trim panel, and rear lower quarter trim panel before closing the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seal 10409134 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10409134 Seal is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10409134 Seal fits certain Chevrolet Impala, Monte Carlo models.
The original GM component designated by manufacturer part number 10409134 maintains top performance when functioning as the Seal, Hood Panel unit. The component 10409134 is constructed from durable material and its dimensions span 2.8 x 2.6 x 0.9 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10409134 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 10409134. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.