Make sure this part fits

GM 10388368
Belt Weatherstrip, Rear Outer Driver Side

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 10388368 Belt Weatherstrip, Rear Outer Driver Side
  • Part Description
    Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip
  • Position
    Rear Outer Driver Side
  • Replaces
    15128409
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10388368 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10388368 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be inserted between the door inner and outer panels during installation for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Insert the lower window channel weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after gathering the tools for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and rear side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door auxiliary weatherstrip for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Open the front and side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Finally, raise the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step to complete the installation for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Close the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after installing the weatherstrip for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the lower center pillar trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Install the rear door auxiliary weatherstrip to the rear door pinchweld flange by pressing it into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old weatherstrip for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Squeeze the weatherstrip together and pull it out of the front door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the upper molded detail to the front of the rear side access door for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Use the integral retaining pins to install it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool is recommended for removing the weatherstrip for the 2008 GMC Canyon? Posted by Customer
    A:
    Use the Door Trim Pad Clip Remover (J 38778) or an equivalent tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you secure the weatherstrip around the rear door frame for the 2010 GMC Canyon? Posted by Customer
    A:
    Secure the weatherstrip with the integral retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new auxiliary weatherstrip for the 2004 GMC Canyon? Posted by Customer
    A:
    Close the front and rear doors as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you ensure the weatherstrip lip overlaps the interior trim panels and headliner for the 2009 GMC Canyon? Posted by Customer
    A:
    Pull the cord on the front door opening weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the upper molded detail for the 2009 GMC Canyon? Posted by Customer
    A:
    Remove the lower molded detail from the front of the side access door using the same tool to release the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after aligning the weatherstrip for the 2005 GMC Canyon? Posted by Customer
    A:
    Firmly seat the weatherstrip into the front door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear side access door auxiliary weatherstrip for the 2007 GMC Canyon? Posted by Customer
    A:
    Open the front and side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door window glass weatherstrip for the 2006 GMC Canyon? Posted by Customer
    A:
    First, lower the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Rear Outer Driver Side 10388368 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10388368 Belt Weatherstrip, Rear Outer Driver Side is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10388368 Belt Weatherstrip, Rear Outer Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 10388368 maintains top performance when functioning as the Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip unit at its Rear Outer Driver Side. The component 10388368 is constructed from durable material and its dimensions span 26.0 x 2.6 x 1.2 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 10388368 has available replacement options 15128409. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.