Make sure this part fits

GM 30020521
Pressure Sensor

1998-2004 GM

Customer Questions & Expert Answers (7)
GM 30020521 Pressure Sensor
GM 30020521 Pressure Sensor
  • Part Description
    Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
  • Replaces
    30018809
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number30020521
    Part DescriptionSensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
    Other NamesSensor, Fuel Tank Meter/Pump
    Item Dimensions2.6 x 2.5 x 1.4 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces30018809
    ManufacturerGeneral Motors
    SKU30020521
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2001 Chevrolet MetroBase, LSi3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
    1999-2004 Chevrolet TrackerBase, LSi, LT, ZR24 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 30020521 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 30020521 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Fuel Pressure Sensor on Chevrolet Metro? Posted by Customer
    A:
    Start the Fuel Tank pressure sensor service by taking out the Fuel Tank from the vehicle then unplug the electrical connector from the sensor. Before disconnecting the Fuel Tank pressure sensor you must first remove two securing bolts then displace the sensor from inside the Fuel Tank. Attach the new Fuel Tank pressure sensor by facing its terminals toward the Fuel Level Sensor and fasten it to the Fuel Tank using the 2 bolts while torquing them to 1.2-2.0 n.m (11-18 lb in). Connect the electrical connector back to the Fuel Tank pressure sensor while replacing the Fuel Tank onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Fuel Pressure Sensor on Chevrolet Tracker? Posted by Customer
    A:
    Service of the Fuel Tank pressure sensor starts with Fuel Tank removal from the vehicle followed by detachment of the two proper bolts. The electrical connector should first be disconnected from the Fuel Tank pressure sensor while the sensor is being removed. Starting installation with the new Fuel Tank pressure sensor requires its placement into position after which you must follow the fastener notice instructions in cautions and notices. The sensor installation requires both retaining bolts to be fixed through the mounting holes before achieving 3.5 n.m (30 lb in) torque on the retaining bolts. Finish the installation by first reattaching the Fuel Tank pressure sensor electrical connector then putting back the Fuel Tank.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to service the fuel tank pressure sensor for the 2002 Chevrolet Tracker? Posted by Customer
    A:
    Remove the fuel tank from the vehicle and detach both attaching bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Pressure Sensor
    Q:
    How do you install the new fuel tank pressure sensor for the 2004 Chevrolet Tracker? Posted by Customer
    A:
    Place the new fuel tank pressure sensor with a new O-ring seal onto the fuel tank and secure it using the two fasteners, tightening them to 3.5 N.m (30 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Pressure Sensor
    Q:
    What should be done after removing the fuel tank for the 2001 Chevrolet Tracker? Posted by Customer
    A:
    Disconnect the electrical connector from the fuel tank pressure sensor and remove the sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Pressure Sensor
    Q:
    How do you install the new fuel vapor temperature sensor for the 2003 Chevrolet Tracker? Posted by Customer
    A:
    Place the new fuel tank pressure and fuel vapor temperature sensor with a new O-ring seal onto the fuel tank and secure it using the two fasteners, tightening them to 3.5 N.m (30 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Pressure Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 30020521, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 30020521 Pressure Sensor. It is sometimes referred to as GM Fuel Pressure Sensor, GM Vapor Pressure Sensor. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 30020521 Pressure Sensor. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery