Make sure this part fits

GM 89048421
Vehicle Speed Sensor

2004-2010 GM

Customer Questions & Expert Answers (16)
GM 89048421 Vehicle Speed Sensor
  • Part Description
    Sensor, Vehicle Speed; Speed Sensor
  • Manufacturer
    General Motors
Make sure this part fits
$22.41 MSRP: $40.02
You Save: $17.61 (44%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2010 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2010 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89048421 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89048421 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for installing the vehicle speed sensor for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Install the sensor into the transmission case, then install the bolt and tighten it to 11 Nm (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after installing the new VSS for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Reconnect the VSS electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the new VSS be installed for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    When installing the new VSS with the O-ring seal, ensure to tighten it to 17 Nm (13 ft. lbs.) as per the Component Fastener Tightening Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor (VSS) on the Aisin AR5 manual transmission for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is important to ensure when installing the new VSS for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Ensure it is tightened to 17 N.m (13 lb ft) with the O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor in the 4L60-E/4L65-E/4L70-E automatic transmission for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the wiring harness electrical connector from the vehicle speed sensor and remove the harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    How should the speed sensor be installed back into the transfer case for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Install the speed sensor into the transfer case, tightening it to 17 Nm (13 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor (VSS) on the Aisin AR5 - Manual Transmission for the 2007 GMC Canyon? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after disconnecting the wiring harness for the 2005 GMC Canyon? Posted by Customer
    A:
    Remove the bolt and then the vehicle speed sensor, followed by the O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor (VSS) on the Aisin AR5 manual transmission for the 2010 GMC Canyon? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising the 2008 GMC Canyon? Posted by Customer
    A:
    Disconnect the electrical connector from the transfer case speed sensor and remove the sensor along with the O-ring seal from the transfer case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after raising it for the 2006 GMC Canyon? Posted by Customer
    A:
    Disconnect the electrical connector from the transfer case speed sensor and remove the sensor along with the O-ring seal from the transfer case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the first step to replace the Vehicle Speed Sensor in the 4L60-E/4L65-E/4L70-E automatic transmission for the 2009 GMC Canyon? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the procedure for installing the vehicle speed sensor for the 2006 GMC Canyon? Posted by Customer
    A:
    Install the sensor into the transmission case, then install the bolt and tighten it to 11 Nm (97 inch lbs.), following the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Vehicle Speed Sensor 89048421 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89048421 Vehicle Speed Sensor is available in the market under the name GM Vehicle Speed Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89048421 Vehicle Speed Sensor fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 89048421 maintains top performance when functioning as the Sensor, Vehicle Speed; Speed Sensor unit. The component 89048421 is constructed from durable material and its dimensions span 3.1 x 1.5 x 1.2 inches while weighing 0.40 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 89048421 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.