Make sure this part fits

GM 10259200
Heat Shield

1997-2006 GM

Customer Questions & Expert Answers (5)
GM 10259200 Heat Shield
  • Part Description
    Shield, Steering Gear Mounting; Power Steering Hose
  • Replaces
    10445224
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10259200 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10259200 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Buick Rendezvous? Posted by Customer
    A:
    Start by raising your vehicle for replacement of the Power Steering Gear Heat Shield. Begin by unbolting then removing the steering gear heat shield while removing the steering gear heat shield. When installing the steering gear heat shield position it first and use proper installation protocols by following the Fastener Notice in Service Precautions and tighten the bolts to 14 Nm (124 inch lbs.). Torque the steering gear heat shield bolts to 14 Nm (124 inch lbs.) before the vehicle descent.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield for the power steering gear on Chevrolet Venture? Posted by Customer
    A:
    You need to elevate the vehicle during installation tasks. First disconnect the steering gear heat shield mounting bolts/screws before removing the steering gear heat shield from the assembly. Reinstall the steering gear heat shield to its position and install steering gear heat shield bolts/screws prior to lowering the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Chevrolet Venture? Posted by Customer
    A:
    Vehicle elevation followed by suitable platform attachment is required as the first step to replace the power steering gear heat shield. Vehicle owners with all wheel drive must remove the right side engine splash shield before accessing the heat shield. You should begin by taking off the heat shield bolts from the steering gear and then unfastening the whole heat shield. Put the steering gear heat shield into position first before installation and follow the fastener notice in service precautions when doing so. Fit the steering gear heat shield bolts before you tighten them to 14 nm (124 lb ft). After lowering the vehicle, all wheel drive vehicles need to have the right side engine splash shield reinstalled.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after placing the steering gear heat shield for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Install the steering gear heat shield bolts and tighten them to 14 Nm (10 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radius Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield 10259200 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10259200 Heat Shield is available in the market under the name GM Radius Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10259200 Heat Shield fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10259200 maintains top performance when functioning as the Shield, Steering Gear Mounting; Power Steering Hose unit. The component 10259200 is constructed from durable material and its dimensions span 8.2 x 5.1 x 1.8 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Power Steering Pressure Hose; Pressure Hose. The part 10259200 has available replacement options 10445224. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.