Make sure this part fits

GM 15824853
Heat Shield

2006-2011 GM

Customer Questions & Expert Answers (8)
GM 15824853 Heat Shield
  • Part Description
    Shield-Steering Gear Heat; Radius Heat Shield
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15824853 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15824853 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Buick Lucerne? Posted by Customer
    A:
    In order to remove the steering gear heat shield, first, raise and support the vehicle. Disconnect the stabilizer shaft links, and then turn the stabilizer shaft down. Now, pull out the plastic clip on the power steering gear heat shield, then the retaining bolts and remove the heat shield as well. For installation, also install new power steering gear heat shield in place and make sure to refer to the fastener notice. Support the assembly by the cut out and install he retaining bolts and tighten the bolts to 9 n.m (80 lb in). Reconnect the plastic clip to the heat shield and reinstall the stabilizer shaft links before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield for the power steering gear on Buick Lucerne? Posted by Customer
    A:
    The replacement of power steering gear heat shield requires a vehicle lift method combined with support of the vehicle. First detach the stabilizer shaft links before giving the stabilizer shaft a downward rotational movement. Start by removing the plastic clip that secures the power steering gear heat shield before removing the retaining bolts which hold the heat shield in place. After heat shield removal you must install the new power steering gear heat shield while using 9 nm torque (80 inch lbs.) on the retaining bolts. Return the plastic clip to the heat shield then reconnect the stabilizer shaft links and complete the installation by lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Ensure Proper Installation of the Radius Heat Shield on Cadillac DTS? Posted by Customer
    A:
    Power steering gear heat shield replacement requires the support of a raised vehicle. First remove stabilizer shaft links while turning the stabilizer shaft downward. The installation process starts by disconnecting the electrical harness clip from the power steering gear heat shield then removing mounting bolts for heat shield removal. Position the new power steering gear heat shield after which strictly follow the specified fastener notice. Fasten the heat shield by tightening 9 n.m (79 lb in) mounting bolts. Start by reconnecting the electrical harness clip to its designated slot followed by stabilizer shaft position correction and stabilizer shaft link installation after lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Cadillac DTS? Posted by Customer
    A:
    Vehicle maintenance begins by elevating the vehicle onto supports before continuing. Start by detaching the stabilizer shaft links (FE7, FE1, and FE3) and rotate the shaft down. Start by removing the electrical harness clip from the power steering gear heat shield then unfasten its mounting bolts to detach the shield. During installation position the new power steering gear heat shield accurately while always following the specified fastener cautions. Carry out the next steps in the sequence: apply 9 nm (79 lb in) of torque to mounting bolts and attach the electrical harness clip. Following the stabilizer shaft replacement reinsert the shaft and replace stabilizer shaft links (FE7 FE1 and FE3) before dropping the car.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the steering gear heat shield for the 2010 Buick Lucerne? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radius Heat Shield
    Q:
    What should be done after securing the new heat shield for the 2009 Buick Lucerne? Posted by Customer
    A:
    Reattach the plastic clip to the heat shield and reinstall the stabilizer shaft links.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radius Heat Shield
    Q:
    What is the final step in the process for the 2007 Buick Lucerne? Posted by Customer
    A:
    Reinstall the stabilizer shaft links and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radius Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield 15824853 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15824853 Heat Shield is available in the market under the name GM Radius Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15824853 Heat Shield fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 15824853 maintains top performance when functioning as the Shield-Steering Gear Heat; Radius Heat Shield unit. The component 15824853 is constructed from durable material and its dimensions span 17.9 x 9.1 x 4.1 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shield, Steering Gear Mounting. The part 15824853 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.