Make sure this part fits

GM 89019107
Fan Shroud

2004-2009 GM

Customer Questions & Expert Answers (3)
GM 89019107 Fan Shroud
GM 89019107 Fan Shroud
  • Part Description
    Shroud Assembly, Engine Coolant Fan; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly
  • Replaces
    88987274, 89018446
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL6 Cyl 3.8 L GAS
    2004-2005 Chevrolet ImpalaBase, LS, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2004-2005 Chevrolet Monte CarloLS, LT, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89019107 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89019107 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fan shroud on Chevrolet Monte Carlo? Posted by Customer
    A:
    The first step to replace the Fan Shroud consists of battery safety by unplugging the negative cable. The j 38185 hose clamp pliers should be used for right and left engine mount strut removal as well as for air cleaner assembly removal. Disconnect transmission oil cooler lines from the retainer clip by the cooling Fan Shroud bottom before removing and the bolt holding the Fan Shroud to the condenser hold down bracket. Remove the Fan Shroud electrical harness first by disconnecting the engine cooling Fan Motor electrical connector along with the bolts and upper support brackets of the radiator before extracting the Fan Shroud from clips on its peripheral wire harness. Begin by extracting the cooling Fan Shroud before proceeding to detach the engine cooling fan heat shield, engine cooling Fan Blade nut, then finally take out the blade itself. Check each cooling Fan Blade to detect bending or cracking while confirming they have no irregularities during smooth surface inspection. First remove the engine cooling Fan Motor bolts before pulling out the Fan Motor from its shroud position. The installation begins with attaching the engine cooling Fan Motor to the Fan Shroud and fastening its bolts to 6 nm (53 inch lbs.) torque settings while the windmill blade needs its nut tightened to exactly 6 nm (53 inch lbs.). The installation process requires the lower edge of the Fan Shroud to lock into the radiator base clip before completing assembly with bolts that need tightening to 10 nm (89 inch lbs.). Cable the cooling fan electrical harness then join the engine cooling Fan Motor electrical connector followed by attaching the Fan Shroud bolt into the condenser hold down bracket (6 Nm torque). Reinstall the upper radiator support brackets and bolts while tightening them to 10 nm (89 inch lbs.), connect the transmission oil cooler lines and replace the air cleaner assembly before reattaching the left and right engine mount struts for closing the negative battery connection and performing a full functional check.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be disconnected after removing the bolts for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    The engine cooling fan motor's electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fan Shroud
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fan Shroud 89019107 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89019107 Fan Shroud is available in the market under the name GM Fan Shroud. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89019107 Fan Shroud fits certain Chevrolet Impala, Monte Carlo models, as well as Buick LaCrosse. Additionally, it is compatible with Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 89019107 maintains top performance when functioning as the Shroud Assembly, Engine Coolant Fan; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly unit. The component 89019107 is constructed from durable material and its dimensions span 38.8 x 22.6 x 5.6 inches while weighing 7.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shroud; Shroud Kit, Radiator Fan Shroud. The part 89019107 has available replacement options 88987274, 89018446. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.