Make sure this part fits

GM 15044830
Striker, Passenger Side

2004-2012 GM

Customer Questions & Expert Answers (13)
GM 15044830 Striker, Passenger Side
  • Part Description
    Striker, Door Lock Striker
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15044830 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15044830 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the upper rear side access door striker for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the rear side access door and remove the upper door striker trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the upper rear side door latch striker for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Open the rear side access door and remove the rear side access upper door striker trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How should the new striker be secured for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Secure it with the bolts, tightening them to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new upper side access door striker for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Position the upper side access door striker onto the body and ensure it is secured with bolts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after marking the position for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the screw that retains the door striker to the body and then take the door striker off.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the old striker for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Install the new lower side access door striker onto the body, ensuring to follow fastener precautions to avoid vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front door striker for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Mark its position with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the old striker for the 2008 GMC Canyon? Posted by Customer
    A:
    Install the new lower side access door striker onto the body, ensuring to follow the Fastener Notice for proper installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after attaching the new door striker for the 2007 GMC Canyon? Posted by Customer
    A:
    Install the door striker screws to the body and tighten them to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the lower rear side access door striker for the 2007 GMC Canyon? Posted by Customer
    A:
    Open the rear side access door and remove the bolts that secure the lower side access door striker to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front door striker for the 2010 GMC Canyon? Posted by Customer
    A:
    Mark its position with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the upper rear side door latch striker for the 2009 GMC Canyon? Posted by Customer
    A:
    Open the rear side access door and remove the rear side access upper door striker trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker, Passenger Side 15044830 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15044830 Striker, Passenger Side is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15044830 Striker, Passenger Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15044830 maintains top performance when functioning as the Striker, Door Lock Striker unit at its Passenger Side. The component 15044830 is constructed from durable material and its dimensions span 5.0 x 3.7 x 2.1 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15044830 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.