Make sure this part fits

GM 10353637
Striker, Rear

1997-2008 GM

Customer Questions & Expert Answers (11)
GM 10353637 Striker, Rear
  • Part Description
    Striker Assembly-Rear Side Door Lock
  • Position
    Rear
  • Replaces
    10233960
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10353637 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10353637 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is important to ensure regarding the latch and striker for the 2005 Buick Terraza? Posted by Customer
    A:
    Ensure the latch contacts the center of the striker, adjusting shims as needed for proper alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should you do after disabling the PSD system for the 2006 Buick Terraza? Posted by Customer
    A:
    Open the sliding door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be ensured regarding the latch and striker for the 2007 Buick Terraza? Posted by Customer
    A:
    Ensure the latch contacts the center of the striker; if misaligned, add or remove shims as needed for proper alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after scribing the location for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Remove the front door lock striker screws, followed by the removal of the front door lock striker plate and shim from the B-pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done at the end of the process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the low current logic power by reinstalling the PSD 15A fuse into the instrument panel fuse block, which will make the power sliding doors operational, although both modules will need to learn the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the process for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Finally, install the sliding door striker screws and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the process for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Close the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How should the striker be used to adjust the door for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Use the striker to adjust the door for flushness, but do not use it to raise or lower the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front side door lock striker for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Open the front door and scribe the location of the existing front door lock striker on the B-pillar with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is crucial to check after installation for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Ensure that the front door striker properly engages with the front door lock after adjusting the front door within the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker, Rear 10353637 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10353637 Striker, Rear is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10353637 Striker, Rear fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10353637 maintains top performance when functioning as the Striker Assembly-Rear Side Door Lock unit at its Rear. The component 10353637 is constructed from durable material and its dimensions span 3.7 x 3.7 x 2.2 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Striker, Door Lock Striker. The part 10353637 has available replacement options 10233960. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.