Make sure this part fits

GM 15171370
Striker

2004-2012 GM

Customer Questions & Expert Answers (13)
GM 15171370 Striker
GM 15171370 Striker
  • Part Description
    Striker, Instrument Panel Compartment Door Lock And Console Compartment Door Lock
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2009-2010 Hummer H3TAlpha, Base5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15171370 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15171370 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new upper side access door striker for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Position the new upper side access door striker onto the body and install the bolts, ensuring they are tightened to 25 N.m (18.14 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step after installing the striker for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Reinstall the rear side access upper door striker trim cover and close the rear side access door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new striker for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Position the upper side access door striker onto the body and ensure to follow fastener caution guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the old striker for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Take out the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you secure the new striker for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Secure the striker by installing the bolts and tightening them to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after attaching the new door striker for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Install the door striker screws to the body and tighten them to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after marking the position for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove the screw that retains the door striker to the body and then take the door striker off.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done if the lock striker needs adjustment for the 2010 GMC Canyon? Posted by Customer
    A:
    Adjust the lock striker for proper alignment if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new upper side access door striker for the 2009 GMC Canyon? Posted by Customer
    A:
    Position the upper side access door striker onto the body and ensure it is secured with bolts, tightening them to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after attaching the new door striker for the 2007 GMC Canyon? Posted by Customer
    A:
    Install the door striker screws to the body and tighten them to 25 N.m (18.4 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after installing the new striker for the 2007 GMC Canyon? Posted by Customer
    A:
    Secure it with the bolts, tightening them to 25 N.m (18.4 lb ft) following the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step after installing the new striker for the 2008 GMC Canyon? Posted by Customer
    A:
    Close the rear side access door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker 15171370 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15171370 Striker is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15171370 Striker fits certain Chevrolet Colorado models, as well as GMC Canyon. Additionally, it is compatible with Hummer H3T models.
The original GM component designated by manufacturer part number 15171370 maintains top performance when functioning as the Striker, Instrument Panel Compartment Door Lock And Console Compartment Door Lock unit. The component 15171370 is constructed from durable material and its dimensions span 1.0 x 1.1 x 0.9 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Striker, Instrument Panel Compartment. The part 15171370 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.