Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10395406
Striker

2004-2012 GM

Customer Questions & Expert Answers (13)
GM 10395406 Striker
GM 10395406 Striker
GM 10395406 Striker
GM 10395406 Striker
GM 10395406 Striker
  • Part Description
    Striker, Door Lock Striker
  • Position
    Rear
  • Replaces
    97313944
  • Manufacturer
    General Motors
Make sure this part fits
$10.68 MSRP: $15.90
You Save: $5.22 (33%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 10395406 Striker is Ref No. 13 in the diagram below

    2010 Hummer H3T Striker Diagram for 10395406
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10395406

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2006-2010 Hummer H3Alpha, Base, Championship Series, X5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2009-2010 Hummer H3TAlpha, Base5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 10395406 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10395406 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the lower rear side door striker on Chevrolet Colorado? Posted by Customer
    A:
    You should open the rear side access door before removing the bolts which hold down the lower side door striker to the body structure. After extracting the striker itself. Install the new lower side access door striker onto the body by following fastener precautions to protect against vehicle damage. Add the bolts to secure the striker while tightening them to 25 Nm (18 lb ft). Close the rear side access door as the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the upper rear side door striker on Chevrolet Colorado? Posted by Customer
    A:
    The first step to replace the upper rear side door latch striker requires opening the rear side access door while also removing the rear side access upper door striker trim cover. First locate the bolts that link the upper side access door striker to the body before removing both components. Position the upper side access door striker onto the body structure then fasten it securely with bolts while torquing them to 25 N.m (18 lb ft). You should complete this process by putting on the rear side access upper door striker trim cover before you finalize your work on the rear side access door.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the lower rear side door striker on GMC Canyon? Posted by Customer
    A:
    Starting with the replacement of the lower rear side door latch striker requires opening the rear side access door followed by removing the bolts from the lower side access door striker attachment points on the body until the striker can be removed. The installation process for the new lower side access door striker requires you to follow the Fastener Notice while placing it onto the body. You should install the bolts to secure the striker while tightening them until they reach 25 N.m (18 lb ft). Complete the process by shutting the rear side access door.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the lower rear side access door striker on GMC Canyon? Posted by Customer
    A:
    The procedures for replacing the lower rear side access door striker begins with opening the door followed by bolt removal securing the striker to the body before removing the striker component. You will install the new lower side access door striker to the body after which you will follow the Fastener Notice to secure it in place by tightening the bolts to 25 N.m (18.4 lb ft). Close the door of the rear side access after completing the installation process.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if necessary after installation for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Adjust the lock striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the upper rear side door latch striker for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Open the rear side access door and remove the rear side access upper door striker trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the front door striker for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Mark its position with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the upper rear side access door striker for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Open the rear side access door and remove the upper door striker trim cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the lower rear side access door striker for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Open the rear side access door and remove the bolts that secure the lower side access door striker to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the trim cover for the 2009 GMC Canyon? Posted by Customer
    A:
    Take out the bolts that secure the upper side access door striker to the body and then remove the striker itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after marking the position for the 2007 GMC Canyon? Posted by Customer
    A:
    Remove the screw that retains the door striker to the body and then take the door striker off.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new door striker for the 2010 GMC Canyon? Posted by Customer
    A:
    Attach the new door striker to the body, ensuring it aligns with the previously marked position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker 10395406 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10395406 Striker is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10395406 Striker fits certain Chevrolet Colorado models, as well as GMC Canyon. Additionally, it is compatible with Hummer H3, H3T models.
The original GM component designated by manufacturer part number 10395406 maintains top performance when functioning as the Striker, Door Lock Striker unit at its Rear. The component 10395406 is constructed from durable material and its dimensions span 2.9 x 3.2 x 1.6 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10395406 has available replacement options 97313944. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.