Make sure this part fits

GM 22145447
Lower Mount

1995-2005 GM

Customer Questions & Expert Answers (11)
GM 22145447 Lower Mount
  • Part Description
    Strut, Engine Mounting; Engine Mount Bracket; Engine Torque Strut; Motor Mount
  • Manufacturer
    General Motors
Make sure this part fits
$32.10 MSRP: $45.18
You Save: $13.08 (29%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet CavalierBase, LS, LS Sport, RS, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    1995-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22145447 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22145447 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the engine be supported during the replacement for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Support the engine using a block of wood between the floor jack and the oil pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the engine mount strut be installed for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Install the engine mount strut along with the bolts, tightening them to 100 Nm (74 ft. lbs.) + 90 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Torque Strut
    Q:
    What are the last steps after tightening the engine mount for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the Engine Support Fixture (J 28467-360), reinstall the coolant recovery tank, and secure the A/C line mounting nut and the cruise control module mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the process for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Install the cruise control module mounting nuts and tighten them to 10 Nm (89 inch lbs.), then remove the floor jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the engine mount strut for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Torque Strut
    Q:
    How should the engine mount strut bolts be installed for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Install the bolts and tighten them to 100 Nm (74 ft. lbs.) plus an additional 90 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Torque Strut
    Q:
    What is the final step after installation for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Reinstall the right splash shield and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Torque Strut
    Q:
    What needs to be removed after raising the engine for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the nuts securing the mount to the body, followed by the bolts holding the engine mount to the bracket, and then take out the engine mount assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for tightening the nuts on the mount to the body for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Tighten the nuts on the mount to the body to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after installation for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Reinstall the right engine splash shield and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Torque Strut
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Mount 22145447 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22145447 Lower Mount is available in the market under the name GM Engine Mount, Engine Mount Torque Strut. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22145447 Lower Mount fits certain Chevrolet Cavalier models, as well as Pontiac Sunfire models.
The original GM component designated by manufacturer part number 22145447 maintains top performance when functioning as the Strut, Engine Mounting; Engine Mount Bracket; Engine Torque Strut; Motor Mount unit. The component 22145447 is constructed from durable material and its dimensions span 8.5 x 2.9 x 2.6 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Strut. The part 22145447 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.