How to Properly Install an Engine Mount Torque Strut on a Chevrolet Cavalier?

The first step for replacing the engine mount strut requires vehicle suspension and elevation. Start by removing the right engine splash shield followed by the engine mount strut bolts to subsequeuntly extract the engine mount strut. The new engine mount strut needs installation first with attention to the fastener notice provided for service precautions. After installing the engine mount strut bolts apply torque exactly at 100 nm (74 ft. Lbs.) followed by performing a 90-degree torque addition. The last step is to reinstall the right engine splash shield followed by lowering the vehicle.

How to replace the left Engine Mount Torque Strut on Chevrolet Impala?

The first step to replace the left engine mount strut involves disassembling the bolt and nut from the engine mount strut at the left engine mount strut bracket on the engine. Then detach the bolt, nut and engine wiring harness retainer from the engine mount strut at the engine mount strut bracket on the upper radiator support. Thoroughly check the rubber part of the engine mount strut for signs of hardness and cracking and any visible splitting. Start the strut installation process by following the Fastener Notice related to service safety precautions. Put the engine wiring harness retainer components together with bolt and nut and attach them to the engine mount strut which rests at the upper radiator support bracket. Torque the engine mount strut bolt to 48 Nm (35 ft. lbs.). Finish the installation by placing the bolt together with nut on the end strut at the left engine mount strut bracket of the engine while torquing the engine mount strut nut to 48 Nm (35 ft. lbs.).

How to replace the left Engine Mount Torque Strut on Chevrolet Lumina?

The first step of left engine mount strut replacement begins with removing bolt and nut from engine mount strut bracket on the engine side and then continuing with bolt and nut removal from engine mount strut bracket on upper radiator support and finally extracting the engine mount strut. Check the rubber material in the engine mount strut to identify signs of cracking and splitting as well as check for hardness. Reinstall the engine mount strut in the correct position before applying the bolt and nut to the engine mount strut at the engine mount strut bracket on the upper radiator support. Lock down the engine mount strut bolt at 48 Nm (35 ft. lbs. torque). Fasten the engine mount strut through its left bracket positioned on the engine before torquing the nut to 48 Nm (35 ft. lbs.).

OEM Chevrolet Engine Mount Torque Strut

Engine Torque Strut Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Engine Mount Torque Struts found

View related parts
Chevrolet Strut
Part Number: 10345905
$77.89 MSRP: $132.61
You Save: $54.72 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut, Engine Mounting
Fits the following Chevrolet Models:
- Impala | 2006-2011 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Monte Carlo | 2006-2007 | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
- Uplander | 2006 | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View More
View related parts
Chevrolet Strut Mount
Part Number: 25840458
$44.80 MSRP: $76.26
You Save: $31.46 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut Bracket; Strut
Fits the following Chevrolet Models:
- Traverse | 2009-2017 | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Strut Mount
Part Number: 10420009
$45.32 MSRP: $77.17
You Save: $31.85 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut; Strut, Engine Mounting
Fits the following Chevrolet Models:
- Impala | 2000-2005 | Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
- Monte Carlo | 2000-2005 | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Strut
Part Number: 20825879
$33.80 MSRP: $55.69
You Save: $21.89 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Motor Mount
Fits the following Chevrolet Models:
- Impala | 2012-2013 | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Impala Limited | 2014-2016 | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX
View related parts
Chevrolet Torque Strut
Part Number: 22145939
$15.12 MSRP: $50.58
You Save: $35.46 (71%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Front Mount; Mount; Strut; Strut, Engine Mounting
- Replaces: 22145938
Fits the following Chevrolet Models:
- Beretta | 1992-1996 | Base, GT, GTZ, Z26 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
- Corsica | 1992-1996 | Base, LT, LTZ | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lower Trans Mount
Part Number: 84146942
$41.69 MSRP: $71.61
You Save: $29.92 (42%)
ADD TO CART
Product Specifications
- Other Name: Strut, Transmission Mounting; Transmission Mount; Strut
- Replaced by: 86804556
Fits the following Chevrolet Models:
- Equinox | 2018-2024 | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Torque Rod
Part Number: 19317906
$81.94 MSRP: $128.35
You Save: $46.41 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Torque Strut; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut; Strut, Engine Mounting
- Position: Upper
- Replaces: 19316069
Fits the following Chevrolet Models:
- City Express | 2015-2018 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Strut Support
Part Number: 60005916
$44.95 MSRP: $70.41
You Save: $25.46 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Transmission Mounting; Mount
- Replaces: 42481296
Fits the following Chevrolet Models:
- Trailblazer | 2021-2024 | ACTIV, LS, LT, RS | 3 Cyl 1.3 L GAS
View related parts
Chevrolet Strut
Part Number: 10247084
$52.30 MSRP: $89.05
You Save: $36.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
Fits the following Chevrolet Models:
- Uplander | 2005-2008 | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
- Venture | 1997-2005 | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Strut Support
Part Number: 60005915
$44.59 MSRP: $69.84
You Save: $25.25 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Transmission Mounting; Mount
- Replaced by: 60009129
Fits the following Chevrolet Models:
- Trailblazer | 2021-2024 | L, LS, LT | 3 Cyl 1.2 L GAS
View related parts
Chevrolet Strut
Part Number: 94170443
$5.32 MSRP: $36.20
You Save: $30.88 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mounting
Fits the following Chevrolet Models:
- Spectrum | 1985-1988 | Base, CL, CL Plus, Express, Turbo | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Lower Mount
Part Number: 22145447
$32.10 MSRP: $45.18
You Save: $13.08 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut
Fits the following Chevrolet Models:
- Cavalier | 1995-2005 | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Torque Rod
Part Number: 96067918
$24.03 MSRP: $48.26
You Save: $24.23 (51%)
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Rod, Engine
Fits the following Chevrolet Models:
- Sprint | 1985-1988 | Base, ER, Metro, Plus, Turbo | 3 Cyl 1.0 L GAS
View related parts
Chevrolet Strut Mount
Part Number: 10230877
$4.05 MSRP: $6.35
You Save: $2.30 (37%)
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut; Strut, Engine Mount Dampening
Fits the following Chevrolet Models:
- Lumina | 1995-2001 | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
- Monte Carlo | 1995-1999 | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lower Mount
Part Number: 22174912
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut
- Replaces: 22145446
Fits the following Chevrolet Models:
- Cavalier | 1995-2005 | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Torque Strut
Part Number: 10199229
Product Specifications
- Other Name: Mount; Engine Mount Torque Strut; Motor Mount
Fits the following Chevrolet Models:
- Lumina | 1993 | Base | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Strut Rod
Part Number: 10230878
Product Specifications
- Other Name: Strut; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut, Engine Mount Dampening; Strut, Engine Mounting
Fits the following Chevrolet Models:
- Lumina APV | 1996 | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Strut Mount
Part Number: 96060030
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Motor Mount; Torque Rod; Torque Strut; Strut, Engine
Fits the following Chevrolet Models:
- Metro | 1998-2001 | Base, LSi | 4 Cyl 1.3 L GAS
View related parts
Chevrolet Strut
Part Number: 10223927
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut, Engine Mounting
Fits the following Chevrolet Models:
- Lumina | 1991-1997 | Euro, LS, LTZ, Z34 | 6 Cyl 3.4 L GAS
- Monte Carlo | 1995-1997 | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Torque Strut
Part Number: 22188849
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Strut; Strut, Engine Mount Dampening
- Replaces: 22112274, 22112898
Fits the following Chevrolet Models:
- Lumina | 1990-1994 | Base, Euro | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Chevrolet Engine Mount Torque Strut Parts Questions & Experts Answers

Lower Mount
22174912
Q: How to Properly Install an Engine Mount Torque Strut on a Chevrolet Cavalier?
A: The first step for replacing the engine mount strut requires vehicle suspension and elevation. Start by removing the right engine splash shield followed by the engine mount strut bolts to subsequeuntly extract the engine mount strut. The new engine mount strut needs installation first with attention to the fastener notice provided for service precautions. After installing the engine mount strut bolts apply torque exactly at 100 nm (74 ft. Lbs.) followed by performing a 90-degree torque addition. The last step is to reinstall the right engine splash shield followed by lowering the vehicle.
Strut Mount
10420009
Q: How to replace the left Engine Mount Torque Strut on Chevrolet Impala?
A: The first step to replace the left engine mount strut involves disassembling the bolt and nut from the engine mount strut at the left engine mount strut bracket on the engine. Then detach the bolt, nut and engine wiring harness retainer from the engine mount strut at the engine mount strut bracket on the upper radiator support. Thoroughly check the rubber part of the engine mount strut for signs of hardness and cracking and any visible splitting. Start the strut installation process by following the Fastener Notice related to service safety precautions. Put the engine wiring harness retainer components together with bolt and nut and attach them to the engine mount strut which rests at the upper radiator support bracket. Torque the engine mount strut bolt to 48 Nm (35 ft. lbs.). Finish the installation by placing the bolt together with nut on the end strut at the left engine mount strut bracket of the engine while torquing the engine mount strut nut to 48 Nm (35 ft. lbs.).
Strut Mount
10230877
Q: How to replace the left Engine Mount Torque Strut on Chevrolet Lumina?
A: The first step of left engine mount strut replacement begins with removing bolt and nut from engine mount strut bracket on the engine side and then continuing with bolt and nut removal from engine mount strut bracket on upper radiator support and finally extracting the engine mount strut. Check the rubber material in the engine mount strut to identify signs of cracking and splitting as well as check for hardness. Reinstall the engine mount strut in the correct position before applying the bolt and nut to the engine mount strut at the engine mount strut bracket on the upper radiator support. Lock down the engine mount strut bolt at 48 Nm (35 ft. lbs. torque). Fasten the engine mount strut through its left bracket positioned on the engine before torquing the nut to 48 Nm (35 ft. lbs.).