OEM Chevrolet Uplander Engine Mount Torque Strut

Chevrolet Uplander Engine Mount Torque Strut Parts Questions & Experts Answers

• Strut
  10247084
  Q: How to replace the LH Engine Mount Torque Strut on Chevrolet Uplander?

  A: The replacement process of left side engine mount struts should start with intake manifold cover removal. Now that the bolt connects the engine mount strut to the strut bracket you can remove the through bolt with its nut while also taking off the engine harness clip that secures to the through bolt. Moving on to the replacement tasks, first loosen through bolt and nut between the engine mount strut and strut bracket before disabling both components. Then proceed to remove through bolt and the engine mount strut itself. Check the rubber of the engine mount strut for indications of splitting or hardening or presence of breaking. The installation requires first fitting the engine mount strut before securely attaching the engine mount strut to engine mount strut bracket through bolt. You should install the engine mount strut to engine mount strut bracket through bolt and nut with a torque of 48 N.m (36 lb ft). Attach the engine harness clip back to the through bolt while also installing the engine mount strut bracket through bolt with its corresponding nut. After installation of the intake manifold cover complete the procedure by tightening the engine mount strut to engine mount strut bracket through bolt and nut to 48 N.m (36 lb ft).