Make sure this part fits

GM 30016435
Serpentine Belt

1998-2001 GM

Customer Questions & Expert Answers (5)
GM 30016435 Serpentine Belt
  • Part Description
    AC Belt
  • Replaces
    30019502, 30020417
  • Manufacturer
    General Motors
Make sure this part fits
$26.14 MSRP: $59.84
You Save: $33.70 (57%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number30016435
    Part DescriptionAC Belt
    Other NamesPower Steering Belt; A/C Belt
    Item Dimensions10.1 x 8.1 x 6.9 inches
    Item Weight1.30 Pounds
    ConditionNew
    Replaces30019502, 30020417
    ManufacturerGeneral Motors
    SKU30016435
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2001 Chevrolet MetroBase, LSi3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
    1998-2000 Chevrolet TrackerBase, LSi4 Cyl 1.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 30016435 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 30016435 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to inspect and replace the drive belt, and How to install the power steering and generator drive belts on Chevrolet Metro? Posted by Customer
    A:
    Examine the Drive Belt for fractures in its ribs and replace the belt if performance-related cracks appear or if the belt contains any damaged rib area. The pulleys need to have a correct belt alignment before tightening. Adjustments should be made when misalignment is detected. Verify the proper tension of the Drive Belt simultaneously. The vehicle requires support at height before workers can begin their task. They need to remove first the right front tire and wheel assembly and then detach 6 push clips and the right front lower splash shield. Begin by removing the Drive Belt from the pulleys after disconnecting the tension pulley retaining nut and tension bolt. The Drive Belt needs to be routed properly onto the Power Steering Pump pulley and compressor pulley before installation while aligning all elements within the system. Check the pulley tension through thumb pressure before tightening the tension bolt at proper specifications and fastening the tension pulley lock nut with a torque of 45 nm (33 ft.lbs). You should reinstall the right front lower splash shield through its six push clips after installing the right front tire and wheel assembly followed by lowering the vehicle. Before installing the generator Drive Belt, disconnect the negative Battery Cable first and remove both the Power Steering Pump and compressor Drive Belt. First loosen the upper adjuster bolt and lower mounting bolt of the generator Drive Belt then pivot the generator before removing the accessory Drive Belt. The generator Drive Belt installation should be performed by adjusting the tension to obtain 6 - 8 mm (0.24 - 0.31 inch) bending when applying 10 kg (22 lbs.) of force on used belts or 5 - 7 mm (0.20 - 0.27 inch) bending for new belts. After adjusting, the adjuster bolt and mounting bolt should be tightened to 23 nm (17 ft. Lbs.). Install the power steering and compressor Drive Belt before reconnecting the negative Battery Cable by tightening the Battery Cable bolt to 15 nm (11 ft. Lbs.).
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the steps for installing the A/C compressor drive belt for the 2000 Chevrolet Metro? Posted by Customer
    A:
    Route and install the A/C compressor drive belt on the compressor pulley, tension pulley, and crankshaft pulley, align it on the pulleys, inspect the tension using thumb pressure, and adjust the tension bolt to specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What is the first step to replace the accessory drive belt for the 2000 Chevrolet Tracker? Posted by Customer
    A:
    Disconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    Q:
    What is the specified belt deflection for a new belt for the 2000 Chevrolet Tracker? Posted by Customer
    A:
    4 - 5 mm (0.16 - 0.20 inch) under 10 kg (22 lbs.) of force.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 30016435, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 30016435 Serpentine Belt. It is sometimes referred to as GM Drive Belt. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 30016435 Serpentine Belt. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery