Make sure this part fits

GM 25904856
Drip Weatherstrip, Front Passenger Side

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 25904856 Drip Weatherstrip, Front Passenger Side
GM 25904856 Drip Weatherstrip, Front Passenger Side
  • Part Description
    Weatherstrip Assembly-Front Side Door Roof Drip
  • Position
    Front Passenger Side
  • Replaces
    10382334, 15044792, 15916958
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25904856 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25904856 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Finally, raise the rear door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the upper molded detail for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Remove the lower molded detail from the front of the side access door using the same tool to release the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the lower window channel weatherstrip be inserted for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Insert it between the door inner and outer panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after aligning the window weatherstrip for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Firmly seat the window weatherstrip into the front door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Install the rear door auxiliary weatherstrip to the rear door pinchweld flange by pressing it into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the new rear door auxiliary weatherstrip for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Press it into place on the rear door pinchweld flange until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you release the weatherstrip from the door frame for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Insert the tool under the weatherstrip and release the integral retainers from the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Position the new weatherstrip to the rear side access door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the trim panel for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Take out the rear door opening weatherstrip from the door opening pinchweld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you take out the weatherstrip from around the door for the 2010 GMC Canyon? Posted by Customer
    A:
    Insert the Door Trim Pad Clip Remover (J 38778) under the weatherstrip and release the integral pins from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the auxiliary weatherstrip for the 2004 GMC Canyon? Posted by Customer
    A:
    First, open the front and rear doors as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear side access door auxiliary weatherstrip for the 2007 GMC Canyon? Posted by Customer
    A:
    Open the front and side access doors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the order of reinstallation after the weatherstrip is in place for the 2005 GMC Canyon? Posted by Customer
    A:
    Reinstall the front door window, followed by the front window outer belt sealing strip, the front door water deflector, and finally, the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the process for installing the lower molded detail for the 2009 GMC Canyon? Posted by Customer
    A:
    Install it using the one integral retaining pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old sealing strip for the 2006 GMC Canyon? Posted by Customer
    A:
    Position the new rear door outer belt sealing strip to the rear door pinchweld flange and press it down into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you release the weatherstrip from the door frame for the 2008 GMC Canyon? Posted by Customer
    A:
    Insert the tool under the weatherstrip and release the integral retainers from the door frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the lower center pillar panel for the 2009 GMC Canyon? Posted by Customer
    A:
    Take out the front door opening weatherstrip from the door opening pinchweld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drip Weatherstrip, Front Passenger Side 25904856 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25904856 Drip Weatherstrip, Front Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25904856 Drip Weatherstrip, Front Passenger Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 25904856 maintains top performance when functioning as the Weatherstrip Assembly-Front Side Door Roof Drip unit at its Front Passenger Side. The component 25904856 is constructed from durable material and its dimensions span 71.5 x 14.6 x 7.0 inches while weighing 34.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Opening. The part 25904856 has available replacement options 10382334, 15044792, 15916958. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.