Make sure this part fits

GM 10313535
Weatherstrip, Front

2002-2007 Buick Rendezvous

Customer Questions & Expert Answers (8)
GM 10313535 Weatherstrip, Front
GM 10313535 Weatherstrip, Front
  • Part Description
    Weatherstrip Assembly-Front Side Door; Door Seal
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$32.81 MSRP: $72.02
You Save: $39.21 (55%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10313535
    Part DescriptionWeatherstrip Assembly-Front Side Door; Door Seal
    Other NamesWeatherstrip, Door Weatherstrip
    Item Dimensions22.5 x 22.7 x 5.7 inches
    Item Weight0.50 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU10313535
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10313535 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10313535 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door window Weather Strip on Buick Rendezvous? Posted by Customer
    A:
    The first step to replace the front door window Weather Strip begins with lowering the window to its lowest position. Users should first detach the side front door trim panel (Aztek or Rendezvous) then they must remove the water deflector. Start by removing first the outer belt sealing strip then the screw from the Window Channel before moving on to extracting the Window Channel from the front door frame. Place the Window Channel inside the front door according to the fastener notice then install the front door channel screws with a 10 n.m tightness setting (89 lb in torque value). Start installation of the Window Channel at its top corner before checking the window operates correctly. Start the installation by replacing the outer belt sealing strip and then apply the water deflector before putting on the side front door trim panel (Aztek or Rendezvous).
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the new weatherstrip be pressed in for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Press it in a clockwise direction until fully seated, ensuring that the joint butt ends have no gap and are located in the center of the rocker panel area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be ensured when installing the new weatherstrip for the 2002 Buick Rendezvous? Posted by Customer
    A:
    The joint butt ends should have no gap and be centered in the rocker panel area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the roofrail auxiliary weatherstrip push-in retainer for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Position the roofrail auxiliary weatherstrip push-in retainer to the first hole in the upper rear corner and press it in until fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be ensured during the installation of the weatherstrip for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Ensure that the joint butt ends have no gap and are located in the center of the rocker panel area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Open the rear door and remove the rear door sill plates.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the endgate sill plate and close the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10313535, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10313535 Weatherstrip, Front. It is sometimes referred to as GM Weather Strip, GM Door Seal. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10313535 Weatherstrip, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery