Make sure this part fits

GM 10449198
Door Weatherstrip, Front

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 10449198 Door Weatherstrip, Front
GM 10449198 Door Weatherstrip, Front
  • Part Description
    Weatherstrip Assembly-Front Side Door; Door Seal
  • Position
    Front
  • Replaces
    10292525, 10443904
  • Manufacturer
    General Motors
Make sure this part fits
$105.04 MSRP: $154.08
You Save: $49.04 (32%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10449198
    Part DescriptionWeatherstrip Assembly-Front Side Door; Door Seal
    Other NamesWeatherstrip On Body; Weatherstrip, Door Weatherstrip; Weatherstrip, Side Door Opening; Weatherstrip
    Item Dimensions4.8 x 17.6 x 17.3 inches
    Item Weight5.10 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10292525, 10443904
    Require Quantity2
    ManufacturerGeneral Motors
    SKU10449198
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10449198 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10449198 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the correct method to roll the weatherstrip onto the flange for the 2006 Buick Terraza? Posted by Customer
    A:
    Roll the weatherstrip according to the directional arrows, starting at the joint, ensuring the corners are fully seated without stretching the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary weatherstrip on the sliding rear door for the 2007 Buick Terraza? Posted by Customer
    A:
    Fully open the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on a sliding door window for the 2006 Buick Terraza? Posted by Customer
    A:
    Disable the power sliding door (PSD) system by removing the PSD 15A fuse from the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature should the body panel be warmed to for the 2005 Buick Terraza? Posted by Customer
    A:
    A minimum of 21°C (70°F) using a heat lamp or heat gun.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be installed for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Ensure the joint is aligned with the center of the rear quarter window latch attachment point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after warming the body panel for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Peel the backing from the front end of the sliding door auxiliary weatherstrip without touching the adhesive backing, then press the weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Finally, close the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the adhesive backing of the weatherstrip be handled during installation for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Peel the backing from the front end of the weatherstrip without touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the weatherstrip and seals for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Press everything into place until fully seated to the fender.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you ensure proper alignment with the liftgate striker for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Align the bottom center cutout in the weatherstrip to the liftgate striker and use a rubber mallet to ensure full engagement with the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the power sliding door system by reinstalling the PSD 15A fuse into the instrument panel fuse block, which will require both power sliding door modules to learn the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the rear quarter window weatherstrip be installed for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Install the forward joint of the rear quarter window weatherstrip to the vehicle, ensuring it is aligned 50 mm (1.96 in) from the front lower window opening radius.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door auxiliary weatherstrip for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Fully open the sliding rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be noted when installing the new weatherstrip for the 2002 Chevrolet Venture? Posted by Customer
    A:
    The new weatherstrip contains a mastic/sealer/glue, so do not use any additional adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be installed for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Ensure the joint is aligned with the center of the rear quarter window latch attachment point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10449198, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10449198 Door Weatherstrip, Front. It is sometimes referred to as GM Weather Strip, GM Door Seal. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10449198 Door Weatherstrip, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery