Make sure this part fits

GM 10330793
Rear Weatherstrip

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 10330793 Rear Weatherstrip
GM 10330793 Rear Weatherstrip
  • Part Description
    Weatherstrip, Hood Panel
  • Position
    Rear
  • Replaces
    10238445
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10330793 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10330793 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2006 Buick Terraza? Posted by Customer
    A:
    Restore the low current logic power by installing the PSD 15A fuse back into the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you prepare the sliding door for the new weatherstrip for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the existing weatherstrip from the sliding door pinch-weld flange and clean all adhesive from the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature should the body panel be warmed to for the 2005 Buick Terraza? Posted by Customer
    A:
    A minimum of 21°C (70°F) using a heat lamp or heat gun.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can proper adhesion of the weatherstrip be ensured for the 2007 Buick Terraza? Posted by Customer
    A:
    Hand roll the rear side door auxiliary weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you note when installing the new weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    The new weatherstrip contains mastic/sealer/glue, so do not use weatherstrip adhesive; if using the old weatherstrip, apply adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the adhesive backing of the weatherstrip be handled during installation for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Peel the backing from the front end of the weatherstrip without touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear quarter window weatherstrip for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the rear quarter window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the bottom auxiliary weatherstrip for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Install the push-in retainers to the new weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do if reusing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Apply adhesive to the reused weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after installing the forward joint of the weatherstrip for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Roll the weatherstrip from the joint forward around the entire periphery of the window opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can proper adhesion of the weatherstrip be ensured for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Hand roll the rear side door auxiliary weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in ensuring a proper seal of the weatherstrip for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Roll the weatherstrip from the joint to the bottom of the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What if using the old weatherstrip for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Hand spoon the lip over the trim.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done if reusing the old hood rear weatherstrips for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Apply new adhesive GM P/N 12345096.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rear Weatherstrip 10330793 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10330793 Rear Weatherstrip is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10330793 Rear Weatherstrip fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10330793 maintains top performance when functioning as the Weatherstrip, Hood Panel unit at its Rear. The component 10330793 is constructed from durable material and its dimensions span 62.8 x 7.9 x 2.4 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip. The part 10330793 has available replacement options 10238445. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.