Make sure this part fits

GM 10449199
Door Weatherstrip, Passenger Side

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 10449199 Door Weatherstrip, Passenger Side
GM 10449199 Door Weatherstrip, Passenger Side
  • Part Description
    Weatherstrip, Door Weatherstrip; Door Seal
  • Position
    Passenger Side
  • Replaces
    12493209, 10443905, 10416831, 10416829, 12493211
  • Manufacturer
    General Motors
Make sure this part fits
$106.06 MSRP: $151.76
You Save: $45.70 (31%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10449199 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10449199 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you complete the installation of the weatherstrip for the 2006 Buick Terraza? Posted by Customer
    A:
    Carefully pull the tear strip from the joint along the entire length of the weatherstrip, using a spoon if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What does removing the PSD 15A fuse do for the 2006 Buick Terraza? Posted by Customer
    A:
    It interrupts the low current logic power for both the LH and RH power sliding door modules (PSDM), rendering both PSDs inoperative.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can proper adhesion of the weatherstrip be ensured for the 2005 Buick Terraza? Posted by Customer
    A:
    Hand roll the rear side door auxiliary weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the body panel be cleaned for the 2007 Buick Terraza? Posted by Customer
    A:
    Clean the body panel with oil-free naphtha or alcohol.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the power sliding door system by reinstalling the PSD 15A fuse into the instrument panel fuse block, which will require both power sliding door modules to learn the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature should the body panel be warmed to for installation for the 2000 Chevrolet Venture? Posted by Customer
    A:
    A minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Finally, close the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Install the rear quarter window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can proper adhesion of the weatherstrip be ensured for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Hand roll the rear side door auxiliary weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Inspect the weatherstrip for any creases or wrinkles and reinstall the front door opening sill plates.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What needs to be done to the quarter window pinch-weld flange for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Clean all adhesive from the quarter window pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear quarter window weatherstrip for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the rear quarter window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear quarter window for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Pull the rear quarter window weatherstrip from the pinch-weld flange and remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do if reusing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Apply adhesive to the reused weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the weatherstrip and seals for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Press everything into place until fully seated to the fender.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Door Weatherstrip, Passenger Side 10449199 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10449199 Door Weatherstrip, Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10449199 Door Weatherstrip, Passenger Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10449199 maintains top performance when functioning as the Weatherstrip, Door Weatherstrip; Door Seal unit at its Passenger Side. The component 10449199 is constructed from durable material and its dimensions span 4.9 x 18.3 x 17.6 inches while weighing 5.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip On Body; Weatherstrip, Side Door Opening; Weatherstrip. The part 10449199 has available replacement options 12493209, 10443905, 10416831, 10416829, 12493211. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.