How to service the oil pan on 2000 Buick LeSabre?

To service the oil pan, raise and support the vehicle first. Drain the engine oil and put the torque coupler cover off. Remove the oil level switch, torque axis mount bracket bolts, and oil pan bolts, remove the oil pan and the gasket. Clean to gaps within oil pan engaging surfaces and cylinder block. For the installation, attach the new oil pan gasket and install the oil pan but do not over tighten the oil pan bolts, ensuring that no damage occurs on them; when tightening them to 14 Nm (124 inch lbs.). Rerun the torque axis mount bracket bolts and the torque converter cover, as well as the oil level switch. Lastly, don't forget to drive the car back to the ground and complete the oil in the engine.

OEM 2000 Buick LeSabre Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pan found

View related parts
2000 Buick LeSabre Oil Pan
Part Number: 12587389
Product Specifications
- Other Name: Pan, Engine Oil
- Replaces: 24506067
- Item Weight: 20.30 Pounds
- Item Dimensions: 20.9 x 10.6 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12587389
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2000 Buick LeSabre Oil Pan

With a comprehensive array of OEM 2000 Buick LeSabre Oil Pan, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick LeSabre Oil Pan are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick LeSabre Oil Pan Parts Questions & Experts Answers

Q: How to service the oil pan on 2000 Buick LeSabre?
A: To service the oil pan, raise and support the vehicle first. Drain the engine oil and put the torque coupler cover off. Remove the oil level switch, torque axis mount bracket bolts, and oil pan bolts, remove the oil pan and the gasket. Clean to gaps within oil pan engaging surfaces and cylinder block. For the installation, attach the new oil pan gasket and install the oil pan but do not over tighten the oil pan bolts, ensuring that no damage occurs on them; when tightening them to 14 Nm (124 inch lbs.). Rerun the torque axis mount bracket bolts and the torque converter cover, as well as the oil level switch. Lastly, don't forget to drive the car back to the ground and complete the oil in the engine.

Related 2000 Buick LeSabre Parts

Alternate Year Models

1999 Buick LeSabre Oil Pan 2001 Buick LeSabre Oil Pan