How to remove and install a starter motor on 2000 Buick Park Avenue?

In order to disassemble the starter motor, one has to disconnect the negative battery cable and lift the vehicle. Take off the transmission cooler cover, transmission cooler line clip and remove the starter wiring. Disassemble the entire starter mounting bolts, and remove the starter, and attach the electrical terminals during the installation. Lastly, put back the parts and re-insert the battery cable.

OEM 2000 Buick Park Avenue Starter

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starters found

View related parts
2000 Buick Park Avenue Starter Part Number: 10465421
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Item Weight: 9.00 Pounds
- Item Dimensions: 12.6 x 6.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10465421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Park Avenue Starter Assembly Part Number: 10465309
Product Specifications
- Other Name: Starter, Starter Motor; Starter
- Replaces: 10465156
- Item Weight: 8.80 Pounds
- Item Dimensions: 6.1 x 6.1 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10465309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Starter

With a comprehensive array of OEM 2000 Buick Park Avenue Starter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Starter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Starter Parts and Q&A

Q: How to remove and install a starter motor on 2000 Buick Park Avenue?
A: In order to disassemble the starter motor, one has to disconnect the negative battery cable and lift the vehicle. Take off the transmission cooler cover, transmission cooler line clip and remove the starter wiring. Disassemble the entire starter mounting bolts, and remove the starter, and attach the electrical terminals during the installation. Lastly, put back the parts and re-insert the battery cable.