OEM 2000 Cadillac Seville Brake Master Cylinder

2000 Cadillac Seville Brake Master Cylinder Parts Questions & Experts Answers

• Q: How to replace the brake master cylinder on 2000 Cadillac Seville?

  A: Begin replacing the Brake Master Cylinder by emptying fluid from its reservoir first. You should disconnect the retainer and electrical connector from the sensor while also unplugging the brake lines from the master cylinder. Unscrew the two nuts that attach the master cylinder and remove it. When using the reservoir again take it out of service. Install the reservoir on top of the master cylinder and perform a bench bleeding procedure to the master cylinder. Connect the master cylinder to its final position at the power booster and fasten it using the prescribed nuts at 27 nm (20 ft. Lbs. Torque). Connect the brake pipes and tighten them to 15 nm while joining the electrical components to the fluid sensor system. Pour brake fluid into the master cylinder reservoir until it reaches the upper limit mark using delco(R) supreme ii brake fluid or dot 3/dot 4 equivalent fluids before performing a hydraulic system bleeding process.