OEM 2001 Cadillac Seville Brake Master Cylinder

2001 Cadillac Seville Brake Master Cylinder Parts Questions & Experts Answers

• Q: How to replace the brake master cylinder on 2001 Cadillac Seville?

  A: You must disconnect the electrical connector from both brake sensors then remove the brake pipes from the master cylinder. Put rubber plugs on the exposed pipe ends to stop fluid loss before starting the job. You will find and plug the brake pipe ports before removing the two master cylinder mounting nuts to take out the component. You need to take the reservoir away when using it with the master cylinder. Reinstall the Brake Master Cylinder reservoir onto the master cylinder if you took it off while installing then proceed with master cylinder bench bleeding. Secure the Brake Master Cylinder properly onto the vacuum Brake Booster with two 25 nm (18 ft. Lbs.) nuts. Connect the brake pipes to the master cylinder and tighten their fittings at the master cylinder to 33 nm torque. Use the electrical connection to the Brake Fluid Level Sensor before completing hydraulic brake system bleeding.