How to replace the rear Trunk Lock Cylinder on 2000 Chevrolet Astro?

You need to take off the liftgate garnish molding before working on the replacement. After unplugging the electrical connector you must take out the whole rear Wiper Motor from the liftgate. Move the lock cylinder retainer to access the cylinder before taking it out of the liftgate. Start the installation by inserting the lock cylinder into the liftgate then adding the lock cylinder retainer. After setting the rear Wiper Motor you can place its electrical connector back in place followed by installing the liftgate garnish molding.

OEM 2000 Chevrolet Astro Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lock Cylinder found

View related parts
2000 Chevrolet Astro Lock & Cylinder Part Number: 15799773
$208.57 MSRP: $311.83
You Save: $103.26 (34%)
Product Specifications
- Other Name: Cylinder, End Gate Lock; Trunk Lock Cylinder; Door Lock Cylinder; Lock Cylinder; Cylinder, Door Lock Cylinder
- Replaces: 12377147
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 4.9 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15799773
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Astro Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS

2000 Chevrolet Astro Trunk Lock Cylinder

With a comprehensive array of OEM 2000 Chevrolet Astro Trunk Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Astro Trunk Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Astro Trunk Lock Cylinder Parts and Q&A

Q: How to replace the rear Trunk Lock Cylinder on 2000 Chevrolet Astro?
A: You need to take off the liftgate garnish molding before working on the replacement. After unplugging the electrical connector you must take out the whole rear Wiper Motor from the liftgate. Move the lock cylinder retainer to access the cylinder before taking it out of the liftgate. Start the installation by inserting the lock cylinder into the liftgate then adding the lock cylinder retainer. After setting the rear Wiper Motor you can place its electrical connector back in place followed by installing the liftgate garnish molding.