OEM 2000 Chevrolet Camaro Wiper Arm

2000 Chevrolet Camaro Wiper Arm Parts Questions & Experts Answers

• Q: How to service and repair the wiper arm on 2000 Chevrolet Camaro?

  A: The Wiper Arm puller (J 39637) serves as your only needed tool for this job. Switch the ignition to run while setting the wipers in their lowest delay mode. Switch off the ignition when wipers are in their inner wiping position then indicate this mark on the windshield. Use a suitable marker or masking tape. Once you lift the hood and remove the hood nut cover you can unscrew the Wiper Arm nut. Unfasten the Wiper Arm with the Wiper Arm puller (J 39637) tool and detach the wiper from the transmission drive shaft followed by any Wiper Blade removal. After you handle the Wiper Blade assembly, place it back first during installation. Place the Wiper Arm against its reference mark then mount it onto the transmission drive shaft. While setting the 23 n.m torque bolt down you may need to move the Wiper Arm until it stays straight despite manual position adjustments. Fasten the nut safely before you seal the hood and clean your position marks from the windshield. Verify the correct movement of wipers by switching them on and off to make sure they park correctly when stopped.