OEM 2000 Chevrolet Corvette Starter

2000 Chevrolet Corvette Starter Parts Questions & Experts Answers

• Q: How to service and repair the starter motor on 2000 Chevrolet Corvette?

  A: The service and repair of Starter motors requires a beginning step which consists of disconnecting the negative Battery Cable. First isolate the intermediate exhaust piping from the vehicle and afterward disconnect both the positive terminal of the Battery Cable and each cable from the engine harness at the Starter motor stud. Start by taking out the s terminal nut and purple wire lead with washer from the Starter motor while supporting the motor before uninstalling its mounting bolts to remove the Starter from the vehicle. Start by placing the Starter motor into position on the vehicle before supporting its installation. Install the Starter motor mounting bolts while tightening them to 50 n.m (37 lb ft). The purple Starter motor lead wire installation should follow the 10:00 direction with an upward orientation. The s terminal washer should be installed along with the purple lead wire and tightening the s terminal nut requires at least 4 n.m (35 lb in). The connection of engine wiring harness leads to the Starter motor stud should be orientated at positions 6:00 and 7:00. After the engine wiring harness grey wire, install the rust colored wire directly to the Starter motor stud. Follow the process by attaching the positive Battery Cable terminal to the Starter motor stud while tightening the stud nut to 10 n.m (89 lb in). Install the intermediate Exhaust Pipe assembly afterwards reduce the vehicle height and reattach the negative Battery Cable by tightening its bolt to 15 n.m (11 lb ft). Finally, program the transmitters.