How to replace the Crankshaft Position Sensor on 2000 Chevrolet Express 3500?

To replace the crankshaft position (CKP) sensor, initially disconnect the negative Battery Cable and lift the vehicle. Remove the ckp sensor harness connector, next remove the sensor hold down bolt, and finally the sensor from the Timing Cover. Check the sensor o-ring for cover, cracks, leakage, for which it is changed if necessary, and the o-ring oil is lubricated with clean oil of the engine before the installation. Clean the surfaces of the ckp sensor where it is going to be fitted and ensure they are burr-free. While installing the ckp sensor, ensure it is fully seated and stationary in the front cover before you torque the hold down bolt to 8 n.m (71 lb in). Once you have secured the sensor, reconnect the ckp sensor harness connector, replace the vehicle to its original position, and replace the negative Battery Cable. Lastly, get through the ckp the variation learning procedure.

OEM 2000 Chevrolet Express 3500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Position Sensors found

View related parts
2000 Chevrolet Express 3500 Camshaft Position Sensor
Part Number: 19417445
$65.22 MSRP: $122.48
You Save: $57.26 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Express 3500 Submodels:
- Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View related parts
2000 Chevrolet Express 3500 Crankshaft Position Sensor
Part Number: 12596851
$75.43 MSRP: $153.20
You Save: $77.77 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor; Position Sensor
- Replaces: 10456607, 10456532, 12562910
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.2 x 6.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12596851
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Express 3500 Submodels:
- Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View related parts
2000 Chevrolet Express 3500 Crankshaft Position Sensor
Part Number: 12557046
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Position Sensor
- Replaces: 10154687
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12557046
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Express 3500 Submodels:
- Base, LS | 8 Cyl 6.5 L DIESEL

2000 Chevrolet Express 3500 Crankshaft Position Sensor

With a comprehensive array of OEM 2000 Chevrolet Express 3500 Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Express 3500 Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Express 3500 Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2000 Chevrolet Express 3500?
A: To replace the crankshaft position (CKP) sensor, initially disconnect the negative Battery Cable and lift the vehicle. Remove the ckp sensor harness connector, next remove the sensor hold down bolt, and finally the sensor from the Timing Cover. Check the sensor o-ring for cover, cracks, leakage, for which it is changed if necessary, and the o-ring oil is lubricated with clean oil of the engine before the installation. Clean the surfaces of the ckp sensor where it is going to be fitted and ensure they are burr-free. While installing the ckp sensor, ensure it is fully seated and stationary in the front cover before you torque the hold down bolt to 8 n.m (71 lb in). Once you have secured the sensor, reconnect the ckp sensor harness connector, replace the vehicle to its original position, and replace the negative Battery Cable. Lastly, get through the ckp the variation learning procedure.