How to service the power mirror switch on 2000 Chevrolet Impala?

Service of the power mirror switch starts by removing the front door pull cup from the front door inner trim panel. You should disconnect the electrical connectors from the power mirror switch before using a flat-bladed tool at the mirror switch side to release the switch retainer and pull the switch out of the front door pull cup. Installation requires users to fully seat the power mirror switch inside the front door pull cup followed by restoring the electrical connectors to their positions and lastly placing the front door pull cup onto the front door trim panel.

OEM 2000 Chevrolet Impala Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2000 Chevrolet Impala Mirror Switch, Rear
Part Number: 19259979
$37.98 MSRP: $59.49
You Save: $21.51 (37%)
Product Specifications
- Other Name: Switch, Rear View Mirror; Power Mirror Switch
- Position: Rear
- Replaces: 10283839
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259979
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Impala Mirror Switch

With a comprehensive array of OEM 2000 Chevrolet Impala Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Parts Questions & Experts Answers

Q: How to service the power mirror switch on 2000 Chevrolet Impala?
A: Service of the power mirror switch starts by removing the front door pull cup from the front door inner trim panel. You should disconnect the electrical connectors from the power mirror switch before using a flat-bladed tool at the mirror switch side to release the switch retainer and pull the switch out of the front door pull cup. Installation requires users to fully seat the power mirror switch inside the front door pull cup followed by restoring the electrical connectors to their positions and lastly placing the front door pull cup onto the front door trim panel.