Other Name: Handle; Interior Door Handle; Handle, Door Lock Inside Handle
Position: Passenger Side
Condition: New
Fitment Type: Direct Replacement
SKU: 10269048
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following 2000 Chevrolet Lumina Submodels:
Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
2000 Chevrolet Lumina Door Handle
With a comprehensive array of OEM 2000 Chevrolet Lumina Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Lumina Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Chevrolet Lumina Door Handle Parts Questions & Experts Answers
Q: How to replace the front interior door handle on 2000 Chevrolet Lumina?
A: Before handling the front door interior handle you need to move the window up to its maximum position followed by removing the trim panel along with the water deflector. You can open the handle clips to take off the lock and handle rods (2,3) from the handle. Standard shop practices must be followed with emphasis on wearing eye protection because they protect against personal injuries. After mandrel removal support the rear of rivet with care to maintain straight metal alignment before using a center punch to extract the mandrel while drilling out rivets with a 6 mm (1/4 in) drill bit. Extract the door interior handle before proceeding to remove it from the door. First connect the inside door handle to the door while inserting the rivet through the handle hole followed by installation through its slot. The handle and lock rods (2,3) can then be reunited by using clips to secure the rivets that were installed next. Reinstall both the water deflector and the trim panel as the last step.