OEM 2000 Chevrolet Monte Carlo Engine Mount Torque Strut

2000 Chevrolet Monte Carlo Engine Mount Torque Strut Parts and Q&A

• Q: How to replace the left Engine Mount Torque Strut on 2000 Chevrolet Monte Carlo?

  A: The left engine mount strut replacement starts by disconnecting the bolt and nut that secure the left engine mount strut bracket on the engine followed by unbolt and unfastening the left engine mount strut bracket on the upper radiator support then extracting the engine mount strut. The rubber part of the engine mount strut requires investigation to check for hardness and any signs of splitting or cracking. The installation starts with fitting the engine mount strut while following the Fastener Notice in Service Precautions. Fasten the bolt and nut into the left engine mount strut bracket located on the upper radiator support before securing the engine mount strut bolt with 48 Nm (35 ft. lbs.) torque value. When installing the P-clip to the left engine mount strut bracket bolt ensure that the engine mount strut bolt matches the graphic indication. In the end, attach the bolt and nut combination to the left engine mount strut bracket located on the engine and fasten the engine mount strut nut with a 48 Nm torque value.