OEM 2000 Chevrolet Monte Carlo Oil Filter

2000 Chevrolet Monte Carlo Parts Questions & Experts Answers

• Q: How to service and repair the oil filter on 2000 Chevrolet Monte Carlo?

  A: Before starting filter service and repair work properly support the vehicle at an appropriate height. Place the oil drain pan under the engine oil Drain Plug before removing this plug. Check the engine oil Drain Plug for damage before repairing or replacing it while performing the same inspection protocol for the Oil Pan sealing surface and performing a replacement if required. After the Oil Filter removal step you need to clean and inspect the Oil Filter adapter sealing area. Replace the adapter if it shows any signs of damage. Apply mild engine oil to the gasket area of your new Oil Filter before installation per the filter manufacturer instructions. Tighten the engine oil Drain Plug to 30 nm (22 ft. Lbs.) after installation before you remove the oil drain pan and lower the vehicle. Put new engine oil into the compartment before starting the engine and inspect for any evidence of leaking fluid. When startup completes turn the engine off before the oil drains into the Oil Pan during a few minute period. Reinstall the cleaned oil level indicator back into the tube while making sure its handle reaches the top of the tube. Check the engine oil level after removing the oil level indicator with its tip facing downwards. Check the oil level and top off with oil when needed. Also inspect for any oil leaks at this time.