OEM 2000 Chevrolet Monte Carlo Spark Plug

2000 Chevrolet Monte Carlo Parts Questions & Experts Answers

• Q: How to replace spark plugs in an engine on 2000 Chevrolet Monte Carlo?

  A: Starting with Ignition Switch off the worker should remove Spark Plug Wires from their position on the spark plugs. Wait for engine temperature to decrease before working because hot plugs can seize thread connections with the Cylinder Head thus damaging it. Before installation clean the Spark Plug recess thoroughly to stop foreign material from entering the Cylinder Head area because it may contaminate threads thus impacting new plug seating; use j38491 thread chaser for cleaning purposes. Your maintenance effort requires removing engine spark plugs properly with vehicle-specific spark plugs instead of substitutes as improper choices could lead to engine damage. All new and reconditioned spark plugs require checking of their gap measurement before installation using a round feeler gage to set the gap at 0.060 in (1.52 mm). The installation process requires the Spark Plug to pass smoothly into the Cylinder Head while fully seating. Use thread chaser tool (J38491) when needed to prevent both cross-threading damage and incomplete seating because these conditions could bring overheating and exhaust blow-by and thread destruction. Seal spark plugs within the engine while tightening them to 15 n.m (11 ft. Lb.) before attaching Spark Plug Wires to each Spark Plug.