Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2007 Chevrolet Monte Carlo | LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
Chevrolet Monte Carlo Spark Plug
Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Spark Plug at unbeatable prices. Every OEM Chevrolet Monte Carlo Spark Plug comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Monte Carlo Spark Plug Parts Questions & Experts Answers
Q: How to replace spark plugs in an engine on Chevrolet Monte Carlo?
A: Engine replacement should begin with waiting until the motor has cooled down because hot temperatures cause the threads to stick and harm the Cylinder Head. Clearing the Spark Plug recess area from contamination will prevent problems with new plug installation. Spark plugs suitable only for the vehicle need installation since different types create severe harm to the engine. When replacing spark plugs of the engine right bank, rotate the engine for better access to the workspace. To commence the procedure first detach both the Spark Plug Wires and then remove the spark plugs from the engine compartment. Spark Plug installation requires gauging the gap precisely with a round wire feeler gauge to maintain the specified dimensions since the pre-set gaps modify while working on the parts. Insert spark plugs into the engine while maintaining 20 n.m (15 lb ft) torque if you install new cylinder heads. Otherwise tighten the plugs to 15 n.m (11 lb ft). Make sure both retainers have proper thread engagement and full seat positioning. A thread chaser (J 41131) should be used for any necessary.thread-cleaning. To complete the installation point the following steps in sequence: mount the Spark Plug Wires then unfasten the engine tilt strap (J 41131) and return the engine to normal position followed by engine mount strut installation.