How to service the coolant reservoir on 2000 Chevrolet Prizm?

In order to service the Coolant Reservoir, you will first need to remove the hose from the reservoir cap, and thereafter, you will pull out the battery. Next, take off the two nuts from Coolant Reservoir and detach its Coolant Reservoir from the car. For the installation, return the Coolant Reservoir back into the vehicle, but always do so referring to the fastener notice in service precautions. Tighten the tight the two Coolant Reservoir nuts to 10 nm (89 inch lbs.), then replace it with the battery. Finally, connect the overflow hose for coolant to the reservoir cap.

OEM 2000 Chevrolet Prizm Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2000 Chevrolet Prizm Reservoir Tank
Part Number: 94856869
Product Specifications
- Other Name: Reservoir, Coolant Recovery; Coolant Reservoir; Reservoir, Engine Coolant Recovery
- Item Weight: 0.80 Pounds
- Item Dimensions: 16.0 x 6.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856869
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2000 Chevrolet Prizm Coolant Reservoir

With a comprehensive array of OEM 2000 Chevrolet Prizm Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Prizm Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Prizm Parts Questions & Experts Answers

Q: How to service the coolant reservoir on 2000 Chevrolet Prizm?
A: In order to service the Coolant Reservoir, you will first need to remove the hose from the reservoir cap, and thereafter, you will pull out the battery. Next, take off the two nuts from Coolant Reservoir and detach its Coolant Reservoir from the car. For the installation, return the Coolant Reservoir back into the vehicle, but always do so referring to the fastener notice in service precautions. Tighten the tight the two Coolant Reservoir nuts to 10 nm (89 inch lbs.), then replace it with the battery. Finally, connect the overflow hose for coolant to the reservoir cap.