ChevyParts
My Garage
My Account
Cart
OEM 2000 Chevrolet Tracker Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Catalytic Converters found
Product Specifications- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Item Weight: 17.30 Pounds
- Item Dimensions: 42.7 x 10.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30026880
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Item Weight: 14.40 Pounds
- Item Dimensions: 36.6 x 9.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30020669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Converter, Warm Up 3Way Catalytic; Front Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Item Weight: 6.10 Pounds
- Item Dimensions: 21.0 x 10.2 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30020667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Chevrolet Tracker Catalytic Converter
With a comprehensive array of OEM 2000 Chevrolet Tracker Catalytic Converter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Catalytic Converter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Chevrolet Tracker Parts Questions & Experts Answers
- Q: How to Replace a Catalytic Converter on 2000 Chevrolet Tracker?A: The pup converter replacement should start with vehicle support and lifting position. An operator should remove the heated Oxygen Sensor (HO2S1) electrical connector before continuing. Do away with the two bolts which maintain the pup Catalytic Converter before pulling it apart from the standard Catalytic Converter structure. The pup Catalytic Converter requires the removal of its three nuts at the Exhaust Manifold flange to break its connection then extract it from the vehicle. Wash all surfaces where the gasket seals with the engine before mounting the components. Always install fresh gaskets and seals whenever you install your new pup Catalytic Converter . Secure the pup Catalytic Converter to the Exhaust Manifold by tightening three of its nuts while leaving them somewhat loose. Fit the pup Catalytic Converter with its new gasket to the standard Catalytic Converter assembly before securing it using two bolts which remain partially loose. Installation starts by reconnecting the electrical connector to the heated Oxygen Sensor (HO2S1) . Before tightening any fasteners verify that all system components are correctly positioned to stop noise and vibration. Torque the bolts between the pup Catalytic Converter and standard Catalytic Converter assembly to 50 nm (37 ft. Lbs.) and torque the nuts connecting it to the Exhaust Manifold at 50 nm (37 ft. Lbs.). Finally, lower the vehicle.
Related 2000 Chevrolet Tracker Parts
2000 Chevrolet Tracker EGR Valve
2000 Chevrolet Tracker Exhaust Manifold
2000 Chevrolet Tracker Muffler
2000 Chevrolet Tracker EGR Tube
2000 Chevrolet Tracker EGR Valve Gasket
2000 Chevrolet Tracker Exhaust Flange Gasket
2000 Chevrolet Tracker Exhaust Hanger
2000 Chevrolet Tracker Exhaust Heat Shield
2000 Chevrolet Tracker Exhaust Manifold Gasket
2000 Chevrolet Tracker Exhaust Pipe
2000 Chevrolet Tracker Fuel Tank Vent Valve
2000 Chevrolet Tracker Vapor Canister