OEM 2000 Chevrolet Tracker Muffler

2000 Chevrolet Tracker Muffler Parts Questions & Experts Answers

• Q: How to service and repair the muffler on 2000 Chevrolet Tracker?

  A: Before working to service and mend the Muffler, lift and stabilize the vehicle. Remove two nuts from the Catalytic Converter assembly and detach it from the resonator/Muffler/tail pipe assembly. Next, we will remove the hangers supporting the resonator/Muffler/tail pipe assembly and pull the assembly out from the vehicle. Clean the gasket and the mating face of seal before installing a new component of exhaust system and must remember to use new gasket and seals. Mount the resonator/Muffler/tail pipe assembly onto the vehicle and hold it in place with hangers. Connect the resonator/Muffler/tail pipe assembly with a new gasket to the Catalytic Converter assembly and tighten it using two nuts, which should not be completely tightened as of now. All system components must be aligned to avoid making noise or vibrations before tightening the fasteners, and the Catalytic Converter to resonator/Muffler/tail pipe assembly bolts must be tighten to 50 nm (37 ft. Lbs.). Finally, lower the vehicle.