How to Replace a Rear Door Hinge on 2000 GMC Safari?

The process to replace the rear Door Hinge (E54) begins with removing the vehicle door together with the taillamp and proceeding to eliminate the taillamp filler panel. Every step of the rear Door Hinge replacement process requires strict adherence to the installation instructions. Start by taking off the trim panel before drawing the hinge half outlines onto both the door and the body. The service hinge template guides you to punch the original welds before drilling 3.0 mm (1/8 in) pilot holes completely through the hinge structure together with frame and reinforcement and gusset at the marked locations. The existing pilot holes serve as positioning references for drilling 13.0 mm (1/2 in) diameter holes through all mentioned components. You should use a chisel to separate the hinge from both door frame and frame welding points before final removal of any remaining welds with a grinder on both door and body side frame. To install the new hinge first cut off the bolt ends until they match the door plate then place the bushing and apply a medium-bodied seal to smooth surfaces of the halves. Mount anchor plates along with their related bolts into position and torques these fasteners to 27 n.m (20 lb ft). After this, align the hinge through the previously marked area. After painting the hinge along with its surrounding region you can move on to installing the trim panel and taillamp filler panel before installing the taillamp. The door installation process ends with vehicle door fitting to the opening frame while maintaining open status for both the left door and right door. Right door full closure should occur only after visual confirmation of proper striker engagement.

OEM 2000 GMC Safari Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Door Hinges found

View related parts
2000 GMC Safari Hinge, Passenger Side Part Number: 15159312
$31.46 MSRP: $60.00
You Save: $28.54 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge, End Gate Closing; Liftgate Hinge; Door Hinge
- Position: Passenger Side
- Replaces: 15649594
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15159312
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Passenger Side Part Number: 15536614
$18.90 MSRP: $36.05
You Save: $17.15 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.9 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15536614
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge Part Number: 15536693
$18.18 MSRP: $21.05
You Save: $2.87 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge, Door Hinge; Door Hinge
- Position: Rear Lower
- Item Weight: 1.60 Pounds
- Item Dimensions: 4.2 x 4.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15536693
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Driver Side Part Number: 15536615
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Driver Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 7.9 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15536615
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge Part Number: 15536617
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Front Upper Driver Side Passenger Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.8 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15536617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge Part Number: 15536692
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge, Door Hinge; Door Hinge
- Position: Rear Upper
- Item Weight: 1.60 Pounds
- Item Dimensions: 5.9 x 5.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15536692
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Driver Side Part Number: 15536618
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Driver Side
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.8 x 4.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15536618
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge Part Number: 15615532
Product Specifications
- Other Name: Door Hinge; Hinge Kit, Door Hinge; Hinge, Door Hinge
- Position: Rear Lower
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.9 x 5.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15615532
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge Part Number: 15615531
Product Specifications
- Other Name: Door Hinge; Hinge Kit, Door Hinge; Hinge, Door Hinge
- Position: Rear Upper
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.8 x 5.5 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15615531
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Passenger Side Part Number: 15536619
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Passenger Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.9 x 4.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15536619
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Passenger Side Part Number: 15536616
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.6 x 5.5 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15536616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Driver Side Part Number: 15714417
Product Specifications
- Other Name: Hinge, Lift Gate; Liftgate Hinge; Door Hinge; Hinge, End Gate Closing
- Position: Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.4 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15714417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 6 Cyl 4.3 L GAS
View related parts
2000 GMC Safari Hinge, Driver Side Part Number: 15536613
Product Specifications
- Other Name: Hinge, Door Hinge
- Position: Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.8 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15536613
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS

2000 GMC Safari Door Hinge

With a comprehensive array of OEM 2000 GMC Safari Door Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Safari Door Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Safari Door Hinge Parts and Q&A

Q: How to Replace a Rear Door Hinge on 2000 GMC Safari?
A: The process to replace the rear Door Hinge (E54) begins with removing the vehicle door together with the taillamp and proceeding to eliminate the taillamp filler panel. Every step of the rear Door Hinge replacement process requires strict adherence to the installation instructions. Start by taking off the trim panel before drawing the hinge half outlines onto both the door and the body. The service hinge template guides you to punch the original welds before drilling 3.0 mm (1/8 in) pilot holes completely through the hinge structure together with frame and reinforcement and gusset at the marked locations. The existing pilot holes serve as positioning references for drilling 13.0 mm (1/2 in) diameter holes through all mentioned components. You should use a chisel to separate the hinge from both door frame and frame welding points before final removal of any remaining welds with a grinder on both door and body side frame. To install the new hinge first cut off the bolt ends until they match the door plate then place the bushing and apply a medium-bodied seal to smooth surfaces of the halves. Mount anchor plates along with their related bolts into position and torques these fasteners to 27 n.m (20 lb ft). After this, align the hinge through the previously marked area. After painting the hinge along with its surrounding region you can move on to installing the trim panel and taillamp filler panel before installing the taillamp. The door installation process ends with vehicle door fitting to the opening frame while maintaining open status for both the left door and right door. Right door full closure should occur only after visual confirmation of proper striker engagement.