How to set up for programming the Engine Control Module on 2000 GMC Safari?

Before you start programming the vehicle control module (VCM) at its eeprom you must verify that vehicle battery is charged fully, switch the vehicle ignition to on position and check that the data link connector (DLC) is well connected. Follow the direction of updated techline terminal to program the vcm per step-by-step instructions. Check all vcm connections while inspecting the itcs terminal and software equipment before trying to program the vcm. Replace the vcm if the programming issue persists. Then start the passlock reprogramming procedure and ckp system variation learn procedure. Check the system's powertrain performance using an obd tool at the end.

OEM 2000 GMC Safari Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Engine Control Module found

View related parts
2000 GMC Safari PCM
Part Number: 16263494
$341.63 MSRP: $610.42
You Save: $268.79 (45%)
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Item Weight: 5.60 Pounds
- Item Dimensions: 11.0 x 8.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16263494
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Safari Submodels:
- SL, SLE, SLT | 6 Cyl 4.3 L GAS

2000 GMC Safari Engine Control Module

With a comprehensive array of OEM 2000 GMC Safari Engine Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Safari Engine Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Safari Parts Questions & Experts Answers

Q: How to set up for programming the Engine Control Module on 2000 GMC Safari?
A: Before you start programming the vehicle control module (VCM) at its eeprom you must verify that vehicle battery is charged fully, switch the vehicle ignition to on position and check that the data link connector (DLC) is well connected. Follow the direction of updated techline terminal to program the vcm per step-by-step instructions. Check all vcm connections while inspecting the itcs terminal and software equipment before trying to program the vcm. Replace the vcm if the programming issue persists. Then start the passlock reprogramming procedure and ckp system variation learn procedure. Check the system's powertrain performance using an obd tool at the end.