OEM 2000 GMC Safari Hood Latch

2000 GMC Safari Parts Questions & Experts Answers

• Q: How to replace the hood latch on 2000 GMC Safari?

  A: The hood primary latch replacement process starts with hood release cable removal through inserting a screwdriver into the cable clip for prying until the cable detaches itself from its housing. The next procedure requires removing primary latch support bolts that connect to the Radiator before extracting the primary latch with bracket from the vehicle until you detach the bracket from the latch. You should connect the bracket to the latch following instructions from the fastener notice for installation. Install the primary latch to the bracket bolts while tightening them to 25 n.m (18 lb ft). Safely position the combination of primary latch and bracket onto the vehicle without screwing in the bolts. Position the primary latch support bolts onto the Radiator before doing any alignment adjustment of the latch against the hood striker pins. The screwing diameter under 25 n.m (18 lb ft) should be applied to secure the hood to Radiator support bolts. Complete the operation by using appropriate equipment to crimp the cable clip which secures the latch and verify proper hood operation.