How to Service and Repair the Exhaust Heat Shield on 2000 GMC Savana 3500?

The first step to work on the heat shield requires vehicle elevation with suitable safety stands for support. Though exhaust system removal is optional at this point, first remove all heat shield retaining bolts to take out the heat shield. Follow these installation steps by putting the heat shield onto the vehicle then apply heat shield bolts before tightening the retainer bolt to 12 nm (106 inch lbs.). Populate the exhaust system before you return the vehicle to floor level through the removal of safety stands. A 1/4 inch (6 mm) drill bit must be used to remove necessary rivets from exhaust tailpipe and Muffler heat shields before their removal. Mount the front Exhaust Pipe heat shield onto position and apply rivets using rivet gun (J 34940). The installation of rivets should be performed with rivet gun (J 34940) for each step during the process of Muffler and exhaust tailpipe heat shields. The vehicle needs a new exhaust system installation before lowering it back onto the ground after taking out safety stands.

OEM 2000 GMC Savana 3500 Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Heat Shields found

View related parts
2000 GMC Savana 3500 Heat Shield
Part Number: 15081303
$22.04 MSRP: $32.80
You Save: $10.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield; Rear Shield
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15081303
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2000 GMC Savana 3500 Heat Shield
Part Number: 15097408
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Item Weight: 1.70 Pounds
- Item Dimensions: 46.0 x 13.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15097408
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
View related parts
2000 GMC Savana 3500 Heat Shield
Part Number: 15097407
Product Specifications
- Other Name: Shield; Exhaust Heat Shield; Shield, Catalytic Converter
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15097407
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 8 Cyl 6.5 L DIESEL

2000 GMC Savana 3500 Exhaust Heat Shield

With a comprehensive array of OEM 2000 GMC Savana 3500 Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Savana 3500 Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Savana 3500 Parts Questions & Experts Answers

Q: How to Service and Repair the Exhaust Heat Shield on 2000 GMC Savana 3500?
A: The first step to work on the heat shield requires vehicle elevation with suitable safety stands for support. Though exhaust system removal is optional at this point, first remove all heat shield retaining bolts to take out the heat shield. Follow these installation steps by putting the heat shield onto the vehicle then apply heat shield bolts before tightening the retainer bolt to 12 nm (106 inch lbs.). Populate the exhaust system before you return the vehicle to floor level through the removal of safety stands. A 1/4 inch (6 mm) drill bit must be used to remove necessary rivets from exhaust tailpipe and Muffler heat shields before their removal. Mount the front Exhaust Pipe heat shield onto position and apply rivets using rivet gun (J 34940). The installation of rivets should be performed with rivet gun (J 34940) for each step during the process of Muffler and exhaust tailpipe heat shields. The vehicle needs a new exhaust system installation before lowering it back onto the ground after taking out safety stands.